I use two Zaurus palmtops - one run 2.4.18 kernel (it's sl-5500) and second
run 2.6.16. Both are running under control of OpenZaurus distribution
(I'm Release Manager of it).
When I use pcmcia-cs then my Pretec WiFi card is handled by hostap driver
and everything is working fine. Recently I switched to pcmciautils and after
card insert orinoco modules are loaded. I prefer to use hostap modules
because they work the same under 2.4 and 2.6 kernels (with orinoco I have to
use 0.13e ones because never ones does not work under 2.4/arm).
This patch adds definition of my card to hostap_cs cardlist. It was tested on
Sharp Zaurus C760 palmtop running 2.6.16 + pcmciautils 010 + udev 084
Signed-off-by: Marcin Juszkiewicz <[EMAIL PROTECTED]>
---
drivers/net/wireless/hostap/hostap_cs.c | 3 +++
1 file changed, 3 insertions(+)
Index: linux/drivers/net/wireless/hostap/hostap_cs.c
===================================================================
--- linux.orig/drivers/net/wireless/hostap/hostap_cs.c 2006-05-16
16:09:28.000000000 +0200
+++ linux/drivers/net/wireless/hostap/hostap_cs.c 2006-05-16
16:10:32.000000000 +0200
@@ -932,6 +932,9 @@
PCMCIA_DEVICE_PROD_ID12("PLANEX COMMUNICATION INC",
"PLANEX GW-CF11X Wireless CF Card",
0x4703cf68, 0xfad7318d),
+ PCMCIA_DEVICE_PROD_ID123(
+ "Pretec", "CompactWLAN Card 802.11b", "2.5",
+ 0x1cadd3e5, 0xe697636c, 0x7a5bfcf1),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
--
JID: hrw-jabber.org
Sharp Zaurus C-760 (OZ 3.5.x)
OpenEmbedded/OpenZaurus/OPIE developer
You can close your eyes to reality, but not to memories.
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
