Date: Thu, 25 Aug 2016 15:35:34 +0200, John Crispin wrote:
>On 25/08/2016 12:44, Sean Wang wrote:
>> 1) mtk_stop() must be called to stop for freeing DMA resources
>> acquired and restoring state changed by mtk_open() when module
>> removal.
>> 
>> 2) group clock disabled related function into mtk_hw_deinit which
>> could be reused with others functionality such as the whole ethernet
>> reset that would be posted in the later series of patches.
>> 
>
>Hi Sean,
>
>these are 2 unrelated changes so they really need to go into two
>separate patches. i also think that change 1) would better fit into the
>future series making use of that functionality.
>
>       John
>

okay. splitting makes sense more

I will leave 1) here 
and move 2) into the better place that is one part of the future series 
about whole ethernet reset, I will post them after the current series is done

thanks for your effort on reviewing

>> Signed-off-by: Sean Wang <sean.w...@mediatek.com>
>> ---
>>  drivers/net/ethernet/mediatek/mtk_eth_soc.c | 22 ++++++++++++++++++----
>>  1 file changed, 18 insertions(+), 4 deletions(-)
>> 
>> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c 
>> b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
>> index 0a4c782..c573475 100644
>> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
>> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
>> @@ -1478,6 +1478,16 @@ static int __init mtk_hw_init(struct mtk_eth *eth)
>>      return 0;
>>  }
>>  
>> +static int mtk_hw_deinit(struct mtk_eth *eth)
>> +{
>> +    clk_disable_unprepare(eth->clk_esw);
>> +    clk_disable_unprepare(eth->clk_gp1);
>> +    clk_disable_unprepare(eth->clk_gp2);
>> +    clk_disable_unprepare(eth->clk_ethif);
>> +
>> +    return 0;
>> +}
>> +
>>  static int __init mtk_init(struct net_device *dev)
>>  {
>>      struct mtk_mac *mac = netdev_priv(dev);
>> @@ -1919,11 +1929,15 @@ err_free_dev:
>>  static int mtk_remove(struct platform_device *pdev)
>>  {
>>      struct mtk_eth *eth = platform_get_drvdata(pdev);
>> +    int i;
>>  
>> -    clk_disable_unprepare(eth->clk_ethif);
>> -    clk_disable_unprepare(eth->clk_esw);
>> -    clk_disable_unprepare(eth->clk_gp1);
>> -    clk_disable_unprepare(eth->clk_gp2);
>> +    /* stop all devices to make sure that dma is properly shut down */
>> +    for (i = 0; i < MTK_MAC_COUNT; i++) {
>> +            if (!eth->netdev[i])
>> +                    continue;
>> +            mtk_stop(eth->netdev[i]);
>> +    }
>> +    mtk_hw_deinit(eth);
>>  
>>      netif_napi_del(&eth->tx_napi);
>>      netif_napi_del(&eth->rx_napi);
>> 

Reply via email to