Jens Osterkamp wrote:
From: Jens Osterkamp <[EMAIL PROTECTED]>
A newer board revision changed the type of ethernet phy.
Moreover, this generalizes the way that a phy gets switched
into fiber mode when autodetection is not available.
Signed-off-by: Jens Osterkamp <[EMAIL PROTECTED]>
Signed-off-by: Arnd Bergmann <[EMAIL PROTECTED]>
---
Index: linus-2.6/drivers/net/sungem_phy.c
===================================================================
--- linus-2.6.orig/drivers/net/sungem_phy.c
+++ linus-2.6/drivers/net/sungem_phy.c
@@ -329,6 +329,30 @@ static int bcm5421_init(struct mii_phy*
return 0;
}
+static int bcm5421_enable_fiber(struct mii_phy* phy)
+{
+ /* enable fiber mode */
+ phy_write(phy, MII_NCONFIG, 0x9020);
+ /* LEDs active in both modes, autosense prio = fiber */
+ phy_write(phy, MII_NCONFIG, 0x945f);
+
+ /* switch off fibre autoneg */
+ phy_write(phy, MII_NCONFIG, 0xfc01);
+ phy_write(phy, 0x0b, 0x0004);
+
+ return 0;
+}
+
+static int bcm5461_enable_fiber(struct mii_phy* phy)
+{
+ phy_write(phy, MII_NCONFIG, 0xfc0c);
+ phy_write(phy, MII_BMCR, 0x4140);
+ phy_write(phy, MII_NCONFIG, 0xfc0b);
+ phy_write(phy, MII_BMCR, 0x0140);
NAK, failed to apply. Also, the whitespace above is borked.
Jeff
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
