Hello Dave,

This series adds support to the ftgmac100 driver for the Aspeed ast2400 and
ast2500 SoCs. In particular, they ensure the driver works correctly on the
ast2500 where the MAC block has seen some changes in register layout.

They have been tested on ast2400 and ast2500 systems with the NCSI stack and
with a directly attached PHY.



Andrew Jeffery (2):
  net/ftgmac100: Separate rx page storage from rxdesc
  net/ftgmac100: Make EDO{R,T}R bits configurable

Gavin Shan (2):
  net/faraday: Avoid PHYSTS_CHG interrupt
  net/faraday: Clear stale interrupts

Joel Stanley (3):
  net/ftgmac100: Adapt for Aspeed SoCs
  net/faraday: Fix phy link irq on Aspeed G5 SoCs
  net/faraday: Configure old MDIO interface on Aspeed SoCs

 drivers/net/ethernet/faraday/ftgmac100.c | 92 ++++++++++++++++++++++++--------
 drivers/net/ethernet/faraday/ftgmac100.h |  8 ++-
 2 files changed, 77 insertions(+), 23 deletions(-)


Reply via email to