> Stefan Wahren <stefan.wah...@i2se.com> hat am 26. September 2016 um 13:07 > geschrieben: > > > The Qualcomm QCA7000 HomePlug GreenPHY supports two interfaces: > UART and SPI. This patch series adds the missing support for UART. > > This driver based on the Qualcomm code [1], but contains some changes: > * use random MAC address per default > * use net_device_stats from device > * share frame decoding between SPI and UART driver > * improve error handling > * reimplement tty_wakeup with work queue (based on slcan) > > The patches 1 - 3 are just for clean up and are not related to > the UART support. Patches 4 - 7 prepare the existing QCA7000 > code for UART support. The last patch contains the new driver. > > In order to test the driver a modified slattach in userspace is also > required. A prepared busybox (includes slattach) can be found here [2]. > > The code itself has been tested on a Freescale i.MX28 board. > > Changes in v2: > * fix build issue by using netif_trans_update() and dev_trans_start() > > [1] - https://github.com/IoE/qca7000 > [2] - https://github.com/lategoodbye/busybox/commits/qca7k_support_1_24 >
Gently ping, since i didn't receive any comment for this version.