On 01/06/2017 01:02 PM, David Miller wrote:
From: Alexander Loktionov <alexander.loktio...@aquantia.com> Date: Fri, 6 Jan 2017 00:06:01 -0800This series introduced the AQtion NIC driver for the aQuantia AQC107/AQC108 network devices. v1: Initial version v2: o Make necessary drivers/net/ethernet changes to integrate software o Drop intermediate atlantic directory o Remove Makefile things only appropriate to out of tree module builidngEvery patch series must be fully bisectable, this means that at each step of the series, the kernel tree must fully build and work properly. You break that already at the first patch, which makes the Kconfig options available, which if enabled will cause a build failure. make[4]: *** No rule to make target 'drivers/net/ethernet/aquantia/aq_main.o', needed by 'drivers/net/ethernet/aquantia/atlantic.o'. Stop. make[4]: *** Waiting for unfinished jobs.... scripts/Makefile.build:551: recipe for target 'drivers/net/ethernet/aquantia' failed make[3]: *** [drivers/net/ethernet/aquantia] Error 2 make[3]: *** Waiting for unfinished jobs.... scripts/Makefile.build:551: recipe for target 'drivers/net/ethernet' failed make[2]: *** [drivers/net/ethernet] Error 2 scripts/Makefile.build:551: recipe for target 'drivers/net' failed make[1]: *** [drivers/net] Error 2 make[1]: *** Waiting for unfinished jobs.... Makefile:988: recipe for target 'drivers' failed make: *** [drivers] Error 2 The way to do this, is to add the pieces of source code infrastrucutre, one piece at a time. And then at the very very end, enable the code into the build.
Thanks, will fix shortly. -- David VL
