Hi all,

This is not exactly new, and was sent before, although back then, I did not
have an user of the pre-declared MDIO board information, but now we do. Note
that I have additional changes queued up to have b53 register platform data for
MIPS bcm47xx and bcm63xx.

Yes I know that we should have the Orion platforms eventually be converted to
Device Tree, but until that happens, I don't want any remaining users of the
old "dsa" platform device (hence the previous DTS submissions for ARM/mvebu)
and, there will be platforms out there that most likely won't never see DT
coming their way (BCM47xx is almost 100% sure, BCM63xx maybe not in a distant
future).

We would probably want the whole series to be merged via David Miller's tree
to simplify things.

Greg, can you Ack/Nack patch 5 since it touched the core LDD?

Thanks!

Changes in v2:

- Rebased against latest net-next/master

- Moved dev_find_class() to device_find_class() into drivers/base/core.c

- Moved dev_to_net_device into net/core/dev.c

- Utilize dsa_chip_data directly instead of dsa_platform_data

- Augmented dsa_chip_data to be multi-CPU port ready

Changes from last submission (few months back):

- rebased against latest net-next

- do not introduce dsa2_platform_data which was overkill and was meant to
  allow us to do exaclty the same things with platform data and Device Tree
  we use the existing dsa_platform_data instead

- properly register MDIO devices when the MDIO bus is registered and associate
  platform_data with them

- add a change to the Orion platform code to demonstrate how this can be used

Thank you

Florian Fainelli (10):
  net: dsa: Pass device pointer to dsa_register_switch
  net: dsa: Make most functions take a dsa_port argument
  net: dsa: Suffix function manipulating device_node with _dn
  net: dsa: Move ports assignment closer to error checking
  drivers: base: Add device_find_class()
  net: dsa: Migrate to device_find_class()
  net: Relocate dev_to_net_device() into core
  net: dsa: Add support for platform data
  net: phy: Allow pre-declaration of MDIO devices
  ARM: orion: Register DSA switch as a MDIO device

 arch/arm/mach-orion5x/common.c               |   2 +-
 arch/arm/mach-orion5x/common.h               |   4 +-
 arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c |   7 +-
 arch/arm/mach-orion5x/rd88f5181l-ge-setup.c  |   7 +-
 arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c |   7 +-
 arch/arm/mach-orion5x/wnr854t-setup.c        |   2 +-
 arch/arm/mach-orion5x/wrt350n-v2-setup.c     |   7 +-
 arch/arm/plat-orion/common.c                 |  25 +++-
 arch/arm/plat-orion/include/plat/common.h    |   4 +-
 drivers/base/core.c                          |  19 +++
 drivers/net/dsa/b53/b53_common.c             |   2 +-
 drivers/net/dsa/mv88e6xxx/chip.c             |  11 +-
 drivers/net/dsa/qca8k.c                      |   2 +-
 drivers/net/phy/Makefile                     |   3 +-
 drivers/net/phy/mdio-boardinfo.c             |  86 ++++++++++++++
 drivers/net/phy/mdio-boardinfo.h             |  19 +++
 drivers/net/phy/mdio_bus.c                   |   5 +
 drivers/net/phy/mdio_device.c                |  11 ++
 include/linux/device.h                       |   1 +
 include/linux/mdio.h                         |   3 +
 include/linux/mod_devicetable.h              |   1 +
 include/linux/netdevice.h                    |   2 +
 include/linux/phy.h                          |  19 +++
 include/net/dsa.h                            |   8 +-
 net/core/dev.c                               |  19 +++
 net/dsa/dsa.c                                |  53 ++-------
 net/dsa/dsa2.c                               | 168 +++++++++++++++++++--------
 net/dsa/dsa_priv.h                           |   4 +-
 28 files changed, 360 insertions(+), 141 deletions(-)
 create mode 100644 drivers/net/phy/mdio-boardinfo.c
 create mode 100644 drivers/net/phy/mdio-boardinfo.h

-- 
2.9.3

Reply via email to