Hi, This set of patches adds support for the Marvell Ethernet Topaz switch family (88E6141/88E6341) which is found on the ESPRESSObin. With this series the network is usable on this board.
As usual, I rebased the series on the very last net-next/master. In this series there is no temperature support which need some patches form Andrew Lunn. As soon as Andrew Lunn will post the needed patch I will send a patch to enable the temperature support. Thanks, Gregory Changelog: v6 -> v7: - rebased on net-next/master (5b8784aaf29b) - Fixed the wrong age time coeff from 15s to 3.75s. - Remove support for temperature sensor v5 -> v6: - rebased on net-next/master (d140199af510) - Fix the redundant check on mv88e6xxx_6341_family (reported by Julia Lawall) - Add support for the 88E6141 - Move support for temperature sensor in the phy part Gregory CLEMENT (2): net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341 net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141 Romain Perier (1): net: dsa: mv88e6xxx: Don't forbid MDIO I/Os for PHY addr >= num_of_ports drivers/net/dsa/mv88e6xxx/chip.c | 102 ++++++++++++++++++++++++--- drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 21 +++++- 2 files changed, 113 insertions(+), 10 deletions(-) base-commit: 334c367fd5cea7a9493c3026f7e6195ebab3d7b9 -- git-series 0.9.1