On Fri, 17 Feb 2017 18:02:31 +0800 Jisheng Zhang <jszh...@marvell.com> wrote:
> In hot code path such as mvneta_rx_hwbm() and mvneta_rx_swbm(), we may > access fields of rx_desc. The rx_desc is allocated by > dma_alloc_coherent, it's uncacheable if the device isn't cache > coherent, reading from uncached memory is fairly slow. > > patch1 reuses the read out status to getting status field of rx_desc > again. > > patch2 uses cacheable memory to store the rx buffer DMA address. > > We get the following performance data on Marvell BG4CT Platforms > (tested with iperf): > > before the patch: > recving 1GB in mvneta_rx_swbm() costs 149265960 ns oops, I still didn't correct the typo here, it should be 1492659600 ns Sorry, but I think there must be comments, I'll fix this typo in v3 when address comments. > > after the patch: > recving 1GB in mvneta_rx_swbm() costs 1421565640 ns > > We saved 4.76% time. > > RFC: can we do similar modification for tx? If yes, I can prepare a v2. > > > Basically, these two patches do what Arnd mentioned in [1]. > > Hi Arnd, > > I added "Suggested-by you" tag, I hope you don't mind ;) > > Thanks > > [1] https://www.spinics.net/lists/netdev/msg405889.html > > Since v1: > - correct the performance data typo > > Jisheng Zhang (2): > net: mvneta: avoid getting status from rx_desc as much as possible > net: mvneta: Use cacheable memory to store the rx buffer DMA address > > drivers/net/ethernet/marvell/mvneta.c | 36 > ++++++++++++++++++++--------------- > 1 file changed, 21 insertions(+), 15 deletions(-) >