hello The following patch address the problem that two way of dumping registers are available in stmmac, via ethtool and directly at init (if NETIF_MSG_HW is enabled). It is better to keep only one method, ethtool, since the other was ugly (logs of pr_xxx).
But by working on this issue, I saw two problem: - "ethtool" for gmac/gmac4 always dump the 55 first registers, while dwmac4_dump_regs dump the first 132 registers, so clearly the current stmmac_ethtool_gregs miss some registers - stmmac_ethtool_gregs claim to dump whole address space (len=REG_SPACE_SIZE), but in fact concat two distant address space. The current patch address all by being bijective between reg_space and address space, so all DMA registers goes to their "real" address in reg_space. But this fix break the pretty print of registers name of ethtool. (ethtool -d eth0 hex on still works). What do you think about this issue ? Corentin Labbe (1): net: stmmac: unify registers dumps methods drivers/net/ethernet/stmicro/stmmac/common.h | 4 +- .../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 10 +-- .../net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 16 ++--- .../net/ethernet/stmicro/stmmac/dwmac100_core.c | 30 +++------ drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 15 ++--- drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 12 +--- drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 78 +++++++++++----------- .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 21 +----- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 -- 9 files changed, 71 insertions(+), 120 deletions(-) -- 2.10.2