On Thu, Mar 09, 2017 at 01:18:11PM -0700, Stephen Warren wrote:
> On 03/09/2017 12:42 PM, Thierry Reding wrote:
> > On Mon, Feb 27, 2017 at 12:09:02PM +0200, Mikko Perttunen wrote:
> > > On 23.02.2017 19:24, Thierry Reding wrote:
> > > > From: Thierry Reding <tred...@nvidia.com>
> > > >
> > > > Program the receive queue size based on the RX FIFO size and enable
> > > > hardware flow control for large FIFOs.
>
> > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
>
> > > > @@ -252,6 +253,44 @@ static void dwmac4_dma_chan_op_mode(void __iomem
> > > > *ioaddr, int txmode,
> > > > mtl_rx_op |= MTL_OP_MODE_RTC_128;
> > > > }
> > > >
> > > > + mtl_rx_op &= ~MTL_OP_MODE_RQS_MASK;
> > > > + mtl_rx_op |= rqs << MTL_OP_MODE_RQS_SHIFT;
> > > > +
> > > > + /* enable flow control only if each channel gets 4 KiB or more
> > > > FIFO */
> > > > + if (rxfifosz >= 4096) {
> > > > + unsigned int rfd, rfa;
> > > > +
> > > > + mtl_rx_op |= MTL_OP_MODE_EHFC;
> > > > +
> > > > + switch (rxfifosz) {
> > > > + case 4096:
> > > > + rfd = 0x03;
> > > > + rfa = 0x01;
> > > > + break;
> > > > +
> > > > + case 8192:
> > > > + rfd = 0x06;
> > > > + rfa = 0x0a;
> > > > + break;
> > > > +
> > > > + case 16384:
> > > > + rfd = 0x06;
> > > > + rfa = 0x12;
> > > > + break;
> > > > +
> > > > + default:
> > > > + rfd = 0x06;
> > > > + rfa = 0x1e;
> > > > + break;
> > > > + }
> > >
> > > Are these values correct? In the 4096 case, rfd > rfa, in all other cases
> > > the other way around. In any case it would be useful to have a comment
> > > clarifying the thresholds in bytes.
> >
> > I'll investigate. To be honest I simply took this from Stephen's U-Boot
> > driver since that's already tested. I trust Stephen, so I didn't bother
> > double-checking.
>
> I don't recall for sure, but I think these values came directly from either
> the upstream kernel (the non-stmmac driver) or NV downstream kernel EQoS
> driver, and I re-used them without investigating. I'm not even sure if the
> outer if() expression is true; these numbers might not even end up being
> used?
Yes they are, and they were even the key to making the STMMAC driver
work on Tegra186. Without programming these fields the driver would fail
to receive any packets.
I noticed that you had comments in the U-Boot driver that I had left out
(most likely because I forgot to add them after cleaning up after the
hacking session). Here's the original extract from U-Boot:
/*
* Set Threshold for Activating Flow Contol space for min 2
* frames ie, (1500 * 1) = 1500 bytes.
*
* Set Threshold for Deactivating Flow Contol for space of
* min 1 frame (frame size 1500bytes) in receive fifo
*/
if (rqs == ((4096 / 256) - 1)) {
/*
* This violates the above formula because of FIFO size
* limit therefore overflow may occur inspite of this.
*/
rfd = 0x3; /* Full-3K */
rfa = 0x1; /* Full-1.5K */
} else if (rqs == ((8192 / 256) - 1)) {
rfd = 0x6; /* Full-4K */
rfa = 0xa; /* Full-6K */
} else if (rqs == ((16384 / 256) - 1)) {
rfd = 0x6; /* Full-4K */
rfa = 0x12; /* Full-10K */
} else {
rfd = 0x6; /* Full-4K */
rfa = 0x1E; /* Full-16K */
}
Two things are strange about this:
1) the first comment says "2 frames", but the threshold value is
clearly just one frame
2) the first set of rfd/rfa values has a wrong comment, by my
understanding: Full-3K should really be Full-2.5K
The encoding of these values is essentially:
threshold = full - (1K + value * 0.5K)
Here's my updated version from the kernel driver:
/*
* Set Threshold for Activating Flow Control to min 2 frames,
* i.e. 1500 * 2 = 3000 bytes.
*
* Set Threshold for Deactivating Flow Control to min 1 frame,
* i.e. 1500 bytes.
*/
switch (rxfifosz) {
case 4096:
/*
* This violates the above formula because of FIFO size
* limit therefore overflow may occur in spite of this.
*/
rfd = 0x03; /* Full-2.5K */
rfa = 0x01; /* Full-1.5K */
break;
case 8192:
rfd = 0x06; /* Full-4K */
rfa = 0x0a; /* Full-6K */
break;
case 16384:
rfd = 0x06; /* Full-4K */
rfa = 0x12; /* Full-10K */
break;
default:
rfd = 0x06; /* Full-4K */
rfa = 0x1e; /* Full-16K */
break;
}
As best as I can tell these values are within the constraints given in
the TRM and they also make sense to me for the purposes they're used
for.
Thierry
signature.asc
Description: PGP signature
