> On Mar 14, 2017, at 5:36 PM, Nikolay Aleksandrov 
> <niko...@cumulusnetworks.com> wrote:
> 
> This patch adds support for ECMP hash policy choice via a new sysctl
> called fib_multipath_hash_policy and also adds support for L4 hashes.
> The current values for fib_multipath_hash_policy are:
> 0 - layer 3 (default)
> 1 - layer 4
> If there's an skb hash already set and it matches the chosen policy then it
> will be used instead of being calculated (currently only for L4).
> In L3 mode we always calculate the hash due to the ICMP error special
> case, the flow dissector's field consistentification should handle the
> address order thus we can remove the address reversals.
> 
> Signed-off-by: Nikolay Aleksandrov <niko...@cumulusnetworks.com>
> ---
> v3:
> - keep the ICMP error special handling and always calc L3 hash
>   Jakub, could you please run your tests with this version ?
> 
> v2:
> - removed the output_key_hash as it's not needed anymore
> - reverted to my original/internal patch with L3 as default hash
> 
> Documentation/networking/ip-sysctl.txt |  8 +++
> include/net/ip_fib.h                   | 14 ++----
> include/net/netns/ipv4.h               |  1 +
> include/net/route.h                    |  9 +---
> net/ipv4/fib_semantics.c               | 11 ++--
> net/ipv4/icmp.c                        | 19 +------
> net/ipv4/route.c                       | 92 ++++++++++++++++++++++++++--------
> net/ipv4/sysctl_net_ipv4.c             |  9 ++++
> 8 files changed, 98 insertions(+), 65 deletions(-)
> 
[snip]
> /* To make ICMP packets follow the right flow, the multipath hash is
> - * calculated from the inner IP addresses in reverse order.
> + * calculated from the inner IP addresses.
>  */
> -static int ip_multipath_icmp_hash(struct sk_buff *skb)
> +static void ip_multipath_icmp_hash(const struct sk_buff *skb,
> +                                struct flowi4 *fl4)
> {
>       const struct iphdr *outer_iph = ip_hdr(skb);
>       struct icmphdr _icmph;
> @@ -1746,33 +1746,85 @@ static int ip_multipath_icmp_hash(struct sk_buff *skb)
>       struct iphdr _inner_iph;
>       const struct iphdr *inner_iph;
> 
> +     fl4->saddr = outer_iph->saddr;
> +     fl4->daddr = outer_iph->daddr;
>       if (unlikely((outer_iph->frag_off & htons(IP_OFFSET)) != 0))
> -             goto standard_hash;
> +             return;
> 
>       icmph = skb_header_pointer(skb, outer_iph->ihl * 4, sizeof(_icmph),
>                                  &_icmph);
>       if (!icmph)
> -             goto standard_hash;
> +             return;
> 
>       if (icmph->type != ICMP_DEST_UNREACH &&
>           icmph->type != ICMP_REDIRECT &&
>           icmph->type != ICMP_TIME_EXCEEDED &&
> -         icmph->type != ICMP_PARAMETERPROB) {
> -             goto standard_hash;
> -     }
> +         icmph->type != ICMP_PARAMETERPROB)
> +             return;
> 
>       inner_iph = skb_header_pointer(skb,
>                                      outer_iph->ihl * 4 + sizeof(_icmph),
>                                      sizeof(_inner_iph), &_inner_iph);
>       if (!inner_iph)
> -             goto standard_hash;
> +             return;
> +     fl4->saddr = inner_iph->saddr;
> +     fl4->daddr = inner_iph->daddr;
> +}
> 
> -     return fib_multipath_hash(inner_iph->daddr, inner_iph->saddr);
> +int fib_multipath_hash(const struct fib_info *fi, const struct flowi4 *fl4,
> +                    const struct sk_buff *skb)
> +{
> +     struct net *net = fi->fib_net;
> +     struct flow_keys hash_keys;
> +     u32 mhash;
> 
> -standard_hash:
> -     return fib_multipath_hash(outer_iph->saddr, outer_iph->daddr);
> -}
> +     switch (net->ipv4.sysctl_fib_multipath_hash_policy) {
> +     case 0:
> +             memset(&hash_keys, 0, sizeof(hash_keys));
> +             hash_keys.control.addr_type = FLOW_DISSECTOR_KEY_IPV4_ADDRS;
> +             if (skb && ip_hdr(skb)->protocol == IPPROTO_ICMP) {
> +                     struct flowi4 _fl4;
> 
> +                     ip_multipath_icmp_hash(skb, &_fl4);

Ugh, obviously I could’ve just passed hash_keys here, will  change this in v4 
but I’ll wait
to see if there aren’t any other comments or issues.

Thanks,
 Nik

> +                     hash_keys.addrs.v4addrs.src = _fl4.saddr;
> +                     hash_keys.addrs.v4addrs.dst = _fl4.daddr;
> +             } else {
> +                     hash_keys.addrs.v4addrs.src = fl4->saddr;
> +                     hash_keys.addrs.v4addrs.dst = fl4->daddr;
> +             }
> +             break;
> +     case 1:
> +             /* skb is currently provided only when forwarding */
> +             if (skb) {
> +                     unsigned int flag = FLOW_DISSECTOR_F_STOP_AT_ENCAP;
> +                     struct flow_keys keys;
> +
> +                     /* short-circuit if we already have L4 hash present */
> +                     if (skb->l4_hash)
> +                             return skb_get_hash_raw(skb) >> 1;
> +                     memset(&hash_keys, 0, sizeof(hash_keys));
> +                     skb_flow_dissect_flow_keys(skb, &keys, flag);
> +                     hash_keys.addrs.v4addrs.src = keys.addrs.v4addrs.src;
> +                     hash_keys.addrs.v4addrs.dst = keys.addrs.v4addrs.dst;
> +                     hash_keys.ports.src = keys.ports.src;
> +                     hash_keys.ports.dst = keys.ports.dst;
> +                     hash_keys.basic.ip_proto = keys.basic.ip_proto;
> +             } else {
> +                     memset(&hash_keys, 0, sizeof(hash_keys));
> +                     hash_keys.control.addr_type = 
> FLOW_DISSECTOR_KEY_IPV4_ADDRS;
> +                     hash_keys.addrs.v4addrs.src = fl4->saddr;
> +                     hash_keys.addrs.v4addrs.dst = fl4->daddr;
> +                     hash_keys.ports.src = fl4->fl4_sport;
> +                     hash_keys.ports.dst = fl4->fl4_dport;
> +                     hash_keys.basic.ip_proto = fl4->flowi4_proto;
> +             }
> +             break;
> +     }
> +     mhash = flow_hash_from_keys(&hash_keys);
> +
> +     return mhash >> 1;
> +}
> +EXPORT_SYMBOL_GPL(fib_multipath_hash);
> #endif /* CONFIG_IP_ROUTE_MULTIPATH */

Reply via email to