* Roger Quadros <rog...@ti.com> [170330 05:37]: > Hi Tony & Dave, > > On 13/03/17 15:42, Roger Quadros wrote: > > Hi, > > > > This series adds ethernet support to am335x-icev2 board. > > > > The ethernet PHYs on the board need an explicit GPIO reset pulse > > to ensure they bootstrap to the correct mode. Without the > > GPIO reset they just don't work. > > > > cheers, > > -roger > > Any comments on this series. Patch 1 is at version 2.
I think you meant patch 2/3 is at version2. I've picked patches 2 and 3 for v4.12 into dt and defconfig branches. You may need to resend the davinci_mdio.c patch alone for Dave as he usually won't pick individual patches I think. Regards, Tony > > Roger Quadros (2): > > net: davinci_mdio: add GPIO reset logic > > ARM: dts: am335x-icev2: Add CPSW ethernet0 and ethernet1 > > > > .../devicetree/bindings/net/davinci-mdio.txt | 2 + > > arch/arm/boot/dts/am335x-icev2.dts | 113 > > +++++++++++++++++++++ > > drivers/net/ethernet/ti/davinci_mdio.c | 68 +++++++++++-- > > 3 files changed, 175 insertions(+), 8 deletions(-) > > > > cheers, > -roger
