On Wed, Apr 12, 2017 at 05:55:10PM -0500, Grygorii Strashko wrote:
> Now the command:
> ethtool --phy-statistics eth0
> will cause system crash with meassage "Unable to handle kernel NULL pointer
> dereference at virtual address 00000010" from:
>
> (kszphy_get_stats) from [<c069f1d8>] (ethtool_get_phy_stats+0xd8/0x210)
> (ethtool_get_phy_stats) from [<c06a0738>] (dev_ethtool+0x5b8/0x228c)
> (dev_ethtool) from [<c06b5484>] (dev_ioctl+0x3fc/0x964)
> (dev_ioctl) from [<c0679f7c>] (sock_ioctl+0x170/0x2c0)
> (sock_ioctl) from [<c02419d4>] (do_vfs_ioctl+0xa8/0x95c)
> (do_vfs_ioctl) from [<c02422c4>] (SyS_ioctl+0x3c/0x64)
> (SyS_ioctl) from [<c0107d60>] (ret_fast_syscall+0x0/0x44)
>
> The reason: phy_driver structure for KSZ9031 phy has no .probe() callback
> defined. As result, struct phy_device *phydev->priv pointer will not be
> initializes (null).
> This issue will affect also following phys:
> KSZ8795, KSZ886X, KSZ8873MLL, KSZ9031, KSZ9021, KSZ8061, KS8737
>
> Fix it by:
> - adding .probe() = kszphy_probe() callback to KSZ9031, KSZ9021
> phys. The kszphy_probe() can be re-used as it doesn't do any phy specific
> settings.
> - removing statistic callbacks from other phys (KSZ8795, KSZ886X,
> KSZ8873MLL, KSZ8061, KS8737) as they doesn't have corresponding
> statistic counters.
>
> Fixes: 2b2427d06426 ("phy: micrel: Add ethtool statistics counters")
> Signed-off-by: Grygorii Strashko <grygorii.stras...@ti.com>
> ---
> changes in v2:
> - probe callback added to KSZ9031, KSZ9021
> - statistic callback removed from KSZ8795, KSZ886X, KSZ8873MLL, KSZ8061,
> KS8737
>
> Link on v1:
> https://lkml.org/lkml/2017/4/10/1183
>
> drivers/net/phy/micrel.c | 18 ++----------------
> 1 file changed, 2 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index 6742070..6f207e6 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -574,7 +574,6 @@ static int ksz9031_config_init(struct phy_device *phydev)
> MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
> tx_data_skews, 4);
> }
> -
> return ksz9031_center_flp_timing(phydev);
> }
Hi Grygorii
Whitespace changed like this should be in a separate patch, or not
made at all.
Otherwise, thanks for looking at the datasheets and fixing this up.
Reviewed-by: Andrew Lunn <and...@lunn.ch>
Andrew
