From: Tony Nguyen <anthony.l.ngu...@intel.com>
We did not have a check in place for MMNGC.MNG_VETO when setting up link
on X550EM_X KR devices which resulted in link loss for the BMC when
loading the driver.
This patch adds a check for ixgbe_check_reset_blocked() in setup_link()
since in that case there is no PHY reset function.
Signed-off-by: Tony Nguyen <anthony.l.ngu...@intel.com>
Tested-by: Andrew Bowers <andrewx.bow...@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 04d6c744b936..2658394599e4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -2526,6 +2526,9 @@ static s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL)
return 0;
+ if (ixgbe_check_reset_blocked(hw))
+ return 0;
+
return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised);
}
--
2.12.2
