PFs and VFs share the same structure of NDOs today,
and the VFs explicitly fails the ndo_xdp() callback stating
it doesn't support XDP.
This results in lots of:
[qede_xdp:1032(enp131s2)]VFs don't support XDP
------------[ cut here ]------------
WARNING: CPU: 4 PID: 1426 at net/core/rtnetlink.c:1637
rtnl_dump_ifinfo+0x354/0x3c0
...
Call Trace:
? __alloc_skb+0x9b/0x1d0
netlink_dump+0x122/0x290
netlink_recvmsg+0x27d/0x430
sock_recvmsg+0x3d/0x50
...
As every dump request for the VF interface info would fail due to
rtnl_xdp_fill() returning an error code.
To resolve this, introduce a subset of the NDOs meant for the VF
in a seperate structure and register that one instead for VFs,
and omit the ndo_xdp initialization.
Fixes: 40b8c45492ef ("qede: Prevent VFs from using XDP")
Signed-off-by: Yuval Mintz <yuval.mi...@cavium.com>
---
drivers/net/ethernet/qlogic/qede/qede_filter.c | 5 -----
drivers/net/ethernet/qlogic/qede/qede_main.c | 22 +++++++++++++++++++++-
2 files changed, 21 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c
b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index eb56520..333876c 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -1028,11 +1028,6 @@ int qede_xdp(struct net_device *dev, struct netdev_xdp
*xdp)
{
struct qede_dev *edev = netdev_priv(dev);
- if (IS_VF(edev)) {
- DP_NOTICE(edev, "VFs don't support XDP\n");
- return -EOPNOTSUPP;
- }
-
switch (xdp->command) {
case XDP_SETUP_PROG:
return qede_xdp_set(edev, xdp->prog);
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c
b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 263fd28..38b77bb 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -563,6 +563,23 @@ static int qede_ioctl(struct net_device *dev, struct ifreq
*ifr, int cmd)
#endif
};
+static const struct net_device_ops qede_netdev_vf_ops = {
+ .ndo_open = qede_open,
+ .ndo_stop = qede_close,
+ .ndo_start_xmit = qede_start_xmit,
+ .ndo_set_rx_mode = qede_set_rx_mode,
+ .ndo_set_mac_address = qede_set_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = qede_change_mtu,
+ .ndo_vlan_rx_add_vid = qede_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = qede_vlan_rx_kill_vid,
+ .ndo_set_features = qede_set_features,
+ .ndo_get_stats64 = qede_get_stats64,
+ .ndo_udp_tunnel_add = qede_udp_tunnel_add,
+ .ndo_udp_tunnel_del = qede_udp_tunnel_del,
+ .ndo_features_check = qede_features_check,
+};
+
/* -------------------------------------------------------------------------
* START OF PROBE / REMOVE
* -------------------------------------------------------------------------
@@ -622,7 +639,10 @@ static void qede_init_ndev(struct qede_dev *edev)
ndev->watchdog_timeo = TX_TIMEOUT;
- ndev->netdev_ops = &qede_netdev_ops;
+ if (IS_VF(edev))
+ ndev->netdev_ops = &qede_netdev_vf_ops;
+ else
+ ndev->netdev_ops = &qede_netdev_ops;
qede_set_ethtool_ops(ndev);
--
1.9.3
