Add messages for non-obvious errors (e.g, no need to add text for malloc
failures or ENODEV failures). This mostly covers the annoying EINVAL errors
Some message strings violate the 80-columns but searchable strings need to
trump that rule.
Signed-off-by: David Ahern <dsah...@gmail.com>
---
net/ipv6/ip6_fib.c | 4 ++++
net/ipv6/route.c | 40 ++++++++++++++++++++++++++++++++--------
2 files changed, 36 insertions(+), 8 deletions(-)
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index c1197e167d3e..deea901746c8 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -498,6 +498,8 @@ static struct fib6_node *fib6_add_1(struct fib6_node *root,
!ipv6_prefix_equal(&key->addr, addr, fn->fn_bit)) {
if (!allow_create) {
if (replace_required) {
+ NL_SET_ERR_MSG(extack,
+ "Can not replace route -
no match found");
pr_warn("Can't replace route, no match
found\n");
return ERR_PTR(-ENOENT);
}
@@ -544,6 +546,8 @@ static struct fib6_node *fib6_add_1(struct fib6_node *root,
* That would keep IPv6 consistent with IPv4
*/
if (replace_required) {
+ NL_SET_ERR_MSG(extack,
+ "Can not replace route - no match
found");
pr_warn("Can't replace route, no match found\n");
return ERR_PTR(-ENOENT);
}
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index ca754ec4054a..80bda31ffbbe 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1857,14 +1857,25 @@ static struct rt6_info *ip6_route_info_create(struct
fib6_config *cfg,
int err = -EINVAL;
/* RTF_PCPU is an internal flag; can not be set by userspace */
- if (cfg->fc_flags & RTF_PCPU)
+ if (cfg->fc_flags & RTF_PCPU) {
+ NL_SET_ERR_MSG(extack, "Userspace can not set RTF_PCPU");
goto out;
+ }
- if (cfg->fc_dst_len > 128 || cfg->fc_src_len > 128)
+ if (cfg->fc_dst_len > 128) {
+ NL_SET_ERR_MSG(extack, "Invalid prefix length");
+ goto out;
+ }
+ if (cfg->fc_src_len > 128) {
+ NL_SET_ERR_MSG(extack, "Invalid source address length");
goto out;
+ }
#ifndef CONFIG_IPV6_SUBTREES
- if (cfg->fc_src_len)
+ if (cfg->fc_src_len) {
+ NL_SET_ERR_MSG(extack,
+ "Specifying source address requires
IPV6_SUBTREES to be enabled");
goto out;
+ }
#endif
if (cfg->fc_ifindex) {
err = -ENODEV;
@@ -2015,9 +2026,10 @@ static struct rt6_info *ip6_route_info_create(struct
fib6_config *cfg,
err = -EINVAL;
if (ipv6_chk_addr_and_flags(net, gw_addr,
gwa_type & IPV6_ADDR_LINKLOCAL ?
- dev : NULL, 0, 0))
+ dev : NULL, 0, 0)) {
+ NL_SET_ERR_MSG(extack, "Invalid gateway address");
goto out;
-
+ }
rt->rt6i_gateway = *gw_addr;
if (gwa_type != (IPV6_ADDR_LINKLOCAL|IPV6_ADDR_UNICAST)) {
@@ -2033,8 +2045,11 @@ static struct rt6_info *ip6_route_info_create(struct
fib6_config *cfg,
addressing
*/
if (!(gwa_type & (IPV6_ADDR_UNICAST |
- IPV6_ADDR_MAPPED)))
+ IPV6_ADDR_MAPPED))) {
+ NL_SET_ERR_MSG(extack,
+ "Invalid gateway address");
goto out;
+ }
if (cfg->fc_table) {
grt = ip6_nh_lookup_table(net, cfg, gw_addr);
@@ -2074,8 +2089,14 @@ static struct rt6_info *ip6_route_info_create(struct
fib6_config *cfg,
goto out;
}
err = -EINVAL;
- if (!dev || (dev->flags & IFF_LOOPBACK))
+ if (!dev) {
+ NL_SET_ERR_MSG(extack, "Egress device not specified");
+ goto out;
+ } else if (dev->flags & IFF_LOOPBACK) {
+ NL_SET_ERR_MSG(extack,
+ "Egress device can not be loopback
device for this route");
goto out;
+ }
}
err = -ENODEV;
@@ -2084,6 +2105,7 @@ static struct rt6_info *ip6_route_info_create(struct
fib6_config *cfg,
if (!ipv6_addr_any(&cfg->fc_prefsrc)) {
if (!ipv6_chk_addr(net, &cfg->fc_prefsrc, dev, 0)) {
+ NL_SET_ERR_MSG(extack, "Invalid source address");
err = -EINVAL;
goto out;
}
@@ -2234,8 +2256,10 @@ static int ip6_route_del(struct fib6_config *cfg,
int err = -ESRCH;
table = fib6_get_table(cfg->fc_nlinfo.nl_net, cfg->fc_table);
- if (!table)
+ if (!table) {
+ NL_SET_ERR_MSG(extack, "FIB table does not exist");
return err;
+ }
read_lock_bh(&table->tb6_lock);
--
2.11.0 (Apple Git-81)
