Convert spaces to tabs where appropriate, and fix up some otherwise
odd indentation.
Signed-off-by: Andrew Lunn <and...@lunn.ch>
---
drivers/net/phy/marvell.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 5d314f143aea..6a5256ceb11e 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -108,24 +108,24 @@
#define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6)
/* Copper Specific Interrupt Enable Register */
-#define MII_88E1318S_PHY_CSIER 0x12
+#define MII_88E1318S_PHY_CSIER 0x12
/* WOL Event Interrupt Enable */
-#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7)
+#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7)
/* LED Timer Control Register */
-#define MII_88E1318S_PHY_LED_TCR 0x12
-#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
-#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
-#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11)
+#define MII_88E1318S_PHY_LED_TCR 0x12
+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
+#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11)
/* Magic Packet MAC address registers */
-#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17
-#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18
-#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19
-#define MII_88E1318S_PHY_WOL_CTRL 0x10
-#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
-#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
+#define MII_88E1318S_PHY_WOL_CTRL 0x10
+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
+#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
#define MII_88E1121_PHY_LED_CTRL 16
#define MII_88E1121_PHY_LED_DEF 0x0030
@@ -152,7 +152,7 @@
#define LPA_FIBER_1000HALF 0x40
#define LPA_FIBER_1000FULL 0x20
-#define LPA_PAUSE_FIBER 0x180
+#define LPA_PAUSE_FIBER 0x180
#define LPA_PAUSE_ASYM_FIBER 0x100
#define ADVERTISE_FIBER_1000HALF 0x40
@@ -596,7 +596,7 @@ static int marvell_config_aneg_fiber(struct phy_device
*phydev)
if (changed == 0) {
/* Advertisement hasn't changed, but maybe aneg was never on to
- * begin with? Or maybe phy was isolated?
+ * begin with? Or maybe phy was isolated?
*/
int ctl = phy_read(phydev, MII_BMCR);
@@ -1515,7 +1515,7 @@ static void marvell_get_strings(struct phy_device
*phydev, u8 *data)
}
#ifndef UINT64_MAX
-#define UINT64_MAX (u64)(~((u64)0))
+#define UINT64_MAX (u64)(~((u64)0))
#endif
static u64 marvell_get_stat(struct phy_device *phydev, int i)
{
--
2.13.2
