From: Tristram Ha <tristram...@microchip.com>

Create new ksz9477.c file from original ksz_common.c.

Signed-off-by: Tristram Ha <tristram...@microchip.com>
---
diff --git a/drivers/net/dsa/microchip/ksz9477.c 
b/drivers/net/dsa/microchip/ksz9477.c
new file mode 100644
index 0000000..bc722b4
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -0,0 +1,1317 @@
+/*
+ * Microchip switch driver main logic
+ *
+ * Copyright (C) 2017
+ *
+ * Permission to use, copy, modify, and/or distribute this software for 
+any
+ * purpose with or without fee is hereby granted, provided that the 
+above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL 
+WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE 
+FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY 
+DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN 
+AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT 
+OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "ksz_priv.h"
+#include "ksz_9477_reg.h"
+
+static const struct {
+       int index;
+       char string[ETH_GSTRING_LEN];
+} mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
+       { 0x00, "rx_hi" },
+       { 0x01, "rx_undersize" },
+       { 0x02, "rx_fragments" },
+       { 0x03, "rx_oversize" },
+       { 0x04, "rx_jabbers" },
+       { 0x05, "rx_symbol_err" },
+       { 0x06, "rx_crc_err" },
+       { 0x07, "rx_align_err" },
+       { 0x08, "rx_mac_ctrl" },
+       { 0x09, "rx_pause" },
+       { 0x0A, "rx_bcast" },
+       { 0x0B, "rx_mcast" },
+       { 0x0C, "rx_ucast" },
+       { 0x0D, "rx_64_or_less" },
+       { 0x0E, "rx_65_127" },
+       { 0x0F, "rx_128_255" },
+       { 0x10, "rx_256_511" },
+       { 0x11, "rx_512_1023" },
+       { 0x12, "rx_1024_1522" },
+       { 0x13, "rx_1523_2000" },
+       { 0x14, "rx_2001" },
+       { 0x15, "tx_hi" },
+       { 0x16, "tx_late_col" },
+       { 0x17, "tx_pause" },
+       { 0x18, "tx_bcast" },
+       { 0x19, "tx_mcast" },
+       { 0x1A, "tx_ucast" },
+       { 0x1B, "tx_deferred" },
+       { 0x1C, "tx_total_col" },
+       { 0x1D, "tx_exc_col" },
+       { 0x1E, "tx_single_col" },
+       { 0x1F, "tx_mult_col" },
+       { 0x80, "rx_total" },
+       { 0x81, "tx_total" },
+       { 0x82, "rx_discards" },
+       { 0x83, "tx_discards" },
+};
+
+static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool 
+set) {
+       u8 data;
+
+       ksz_read8(dev, addr, &data);
+       if (set)
+               data |= bits;
+       else
+               data &= ~bits;
+       ksz_write8(dev, addr, data);
+}
+
+static void ksz_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool 
+set) {
+       u32 data;
+
+       ksz_read32(dev, addr, &data);
+       if (set)
+               data |= bits;
+       else
+               data &= ~bits;
+       ksz_write32(dev, addr, data);
+}
+
+static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
+                        bool set)
+{
+       u32 addr;
+       u8 data;
+
+       addr = PORT_CTRL_ADDR(port, offset);
+       ksz_read8(dev, addr, &data);
+
+       if (set)
+               data |= bits;
+       else
+               data &= ~bits;
+
+       ksz_write8(dev, addr, data);
+}
+
+static void ksz_port_cfg32(struct ksz_device *dev, int port, int offset,
+                          u32 bits, bool set)
+{
+       u32 addr;
+       u32 data;
+
+       addr = PORT_CTRL_ADDR(port, offset);
+       ksz_read32(dev, addr, &data);
+
+       if (set)
+               data |= bits;
+       else
+               data &= ~bits;
+
+       ksz_write32(dev, addr, data);
+}
+
+static int wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton, int 
+timeout) {
+       u8 data;
+
+       do {
+               ksz_read8(dev, REG_SW_VLAN_CTRL, &data);
+               if (!(data & waiton))
+                       break;
+               usleep_range(1, 10);
+       } while (timeout-- > 0);
+
+       if (timeout <= 0)
+               return -ETIMEDOUT;
+
+       return 0;
+}
+
+static int get_vlan_table(struct dsa_switch *ds, u16 vid, u32 
+*vlan_table) {
+       struct ksz_device *dev = ds->priv;
+       int ret;
+
+       mutex_lock(&dev->vlan_mutex);
+
+       ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+       ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
+
+       /* wait to be cleared */
+       ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
+       if (ret < 0) {
+               dev_dbg(dev->dev, "Failed to read vlan table\n");
+               goto exit;
+       }
+
+       ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
+       ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
+       ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
+
+       ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+exit:
+       mutex_unlock(&dev->vlan_mutex);
+
+       return ret;
+}
+
+static int set_vlan_table(struct dsa_switch *ds, u16 vid, u32 
+*vlan_table) {
+       struct ksz_device *dev = ds->priv;
+       int ret;
+
+       mutex_lock(&dev->vlan_mutex);
+
+       ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
+       ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
+       ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
+
+       ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+       ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
+
+       /* wait to be cleared */
+       ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
+       if (ret < 0) {
+               dev_dbg(dev->dev, "Failed to write vlan table\n");
+               goto exit;
+       }
+
+       ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+       /* update vlan cache table */
+       dev->vlan_cache[vid].table[0] = vlan_table[0];
+       dev->vlan_cache[vid].table[1] = vlan_table[1];
+       dev->vlan_cache[vid].table[2] = vlan_table[2];
+
+exit:
+       mutex_unlock(&dev->vlan_mutex);
+
+       return ret;
+}
+
+static void read_table(struct dsa_switch *ds, u32 *table) {
+       struct ksz_device *dev = ds->priv;
+
+       ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
+       ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
+       ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
+       ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]); }
+
+static void write_table(struct dsa_switch *ds, u32 *table) {
+       struct ksz_device *dev = ds->priv;
+
+       ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
+       ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
+       ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
+       ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]); }
+
+static int wait_alu_ready(struct ksz_device *dev, u32 waiton, int 
+timeout) {
+       u32 data;
+
+       do {
+               ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
+               if (!(data & waiton))
+                       break;
+               usleep_range(1, 10);
+       } while (timeout-- > 0);
+
+       if (timeout <= 0)
+               return -ETIMEDOUT;
+
+       return 0;
+}
+
+static int wait_alu_sta_ready(struct ksz_device *dev, u32 waiton, int 
+timeout) {
+       u32 data;
+
+       do {
+               ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data);
+               if (!(data & waiton))
+                       break;
+               usleep_range(1, 10);
+       } while (timeout-- > 0);
+
+       if (timeout <= 0)
+               return -ETIMEDOUT;
+
+       return 0;
+}
+
+static int ksz_reset_switch(struct ksz_device *dev) {
+       u8 data8;
+       u16 data16;
+       u32 data32;
+
+       /* reset switch */
+       ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
+
+       /* turn off SPI DO Edge select */
+       ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+       data8 &= ~SPI_AUTO_EDGE_DETECTION;
+       ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+
+       /* default configuration */
+       ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
+       data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
+             SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
+       ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+
+       /* disable interrupts */
+       ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
+       ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
+       ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
+
+       /* set broadcast storm protection 10% rate */
+       ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
+       data16 &= ~BROADCAST_STORM_RATE;
+       data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
+       ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
+
+       return 0;
+}
+
+static void port_setup(struct ksz_device *dev, int port, bool cpu_port) 
+{
+       u8 data8;
+       u16 data16;
+
+       /* enable tag tail for host port */
+       if (cpu_port)
+               ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
+                            true);
+
+       ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
+
+       /* set back pressure */
+       ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, 
+true);
+
+       /* set flow control */
+       ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+                    PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, true);
+
+       /* enable broadcast storm limit */
+       ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, 
+true);
+
+       /* disable DiffServ priority */
+       ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, 
+false);
+
+       /* replace priority */
+       ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
+                    false);
+       ksz_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
+                      MTI_PVID_REPLACE, false);
+
+       /* enable 802.1p priority */
+       ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
+
+       /* configure MAC to 1G & RGMII mode */
+       ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
+       data8 |= PORT_RGMII_ID_EG_ENABLE;
+       data8 &= ~PORT_MII_NOT_1GBIT;
+       data8 &= ~PORT_MII_SEL_M;
+       data8 |= PORT_RGMII_SEL;
+       ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
+
+       /* clear pending interrupts */
+       ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16); }
+
+static void ksz_config_cpu_port(struct dsa_switch *ds) {
+       struct ksz_device *dev = ds->priv;
+       int i;
+
+       ds->num_ports = dev->port_cnt;
+
+       for (i = 0; i < ds->num_ports; i++) {
+               if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
+                       dev->cpu_port = i;
+
+                       /* enable cpu port */
+                       port_setup(dev, i, true);
+                       dev->HOST_MASK = (1 << dev->cpu_port);
+                       dev->PORT_MASK |= dev->HOST_MASK;
+               }
+       }
+}
+
+static int ksz_setup(struct dsa_switch *ds) {
+       struct ksz_device *dev = ds->priv;
+       int ret = 0;
+
+       dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
+                                      dev->num_vlans, GFP_KERNEL);
+       if (!dev->vlan_cache)
+               return -ENOMEM;
+
+       ret = ksz_reset_switch(dev);
+       if (ret) {
+               dev_err(ds->dev, "failed to reset switch\n");
+               return ret;
+       }
+
+       /* accept packet up to 2000bytes */
+       ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
+
+       ksz_config_cpu_port(ds);
+
+       ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
+
+       /* queue based egress rate limit */
+       ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
+
+       /* start switch */
+       ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
+
+       return 0;
+}
+
+static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch 
+*ds) {
+       return DSA_TAG_PROTO_KSZ;
+}
+
+static int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg) {
+       struct ksz_device *dev = ds->priv;
+       u16 val = 0;
+
+       ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
+
+       return val;
+}
+
+static int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, 
+u16 val) {
+       struct ksz_device *dev = ds->priv;
+
+       ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
+
+       return 0;
+}
+
+static int ksz_enable_port(struct dsa_switch *ds, int port,
+                          struct phy_device *phy)
+{
+       struct ksz_device *dev = ds->priv;
+
+       /* setup slave port */
+       port_setup(dev, port, false);
+
+       return 0;
+}
+
+static void ksz_disable_port(struct dsa_switch *ds, int port,
+                            struct phy_device *phy)
+{
+       struct ksz_device *dev = ds->priv;
+
+       /* there is no port disable */
+       ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, true); }
+
+static int ksz_sset_count(struct dsa_switch *ds) {
+       return TOTAL_SWITCH_COUNTER_NUM;
+}
+
+static void ksz_get_strings(struct dsa_switch *ds, int port, uint8_t 
+*buf) {
+       int i;
+
+       for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+               memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
+                      ETH_GSTRING_LEN);
+       }
+}
+
+static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
+                                 uint64_t *buf)
+{
+       struct ksz_device *dev = ds->priv;
+       int i;
+       u32 data;
+       int timeout;
+
+       mutex_lock(&dev->stats_mutex);
+
+       for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+               data = MIB_COUNTER_READ;
+               data |= ((mib_names[i].index & 0xFF) << MIB_COUNTER_INDEX_S);
+               ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
+
+               timeout = 1000;
+               do {
+                       ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
+                                   &data);
+                       usleep_range(1, 10);
+                       if (!(data & MIB_COUNTER_READ))
+                               break;
+               } while (timeout-- > 0);
+
+               /* failed to read MIB. get out of loop */
+               if (!timeout) {
+                       dev_dbg(dev->dev, "Failed to get MIB\n");
+                       break;
+               }
+
+               /* count resets upon read */
+               ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
+
+               dev->ports[port].mib.info[i].counter += (uint64_t)data;
+               buf[i] = dev->ports[port].mib.info[i].counter;
+       }
+
+       mutex_unlock(&dev->stats_mutex);
+}
+
+static void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 
+state) {
+       struct ksz_device *dev = ds->priv;
+       u8 data;
+
+       ksz_pread8(dev, port, P_STP_CTRL, &data);
+       data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+
+       switch (state) {
+       case BR_STATE_DISABLED:
+               data |= PORT_LEARN_DISABLE;
+               break;
+       case BR_STATE_LISTENING:
+               data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+               break;
+       case BR_STATE_LEARNING:
+               data |= PORT_RX_ENABLE;
+               break;
+       case BR_STATE_FORWARDING:
+               data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+               break;
+       case BR_STATE_BLOCKING:
+               data |= PORT_LEARN_DISABLE;
+               break;
+       default:
+               dev_err(ds->dev, "invalid STP state: %d\n", state);
+               return;
+       }
+
+       ksz_pwrite8(dev, port, P_STP_CTRL, data); }
+
+static void ksz_port_fast_age(struct dsa_switch *ds, int port) {
+       struct ksz_device *dev = ds->priv;
+       u8 data8;
+
+       ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
+       data8 |= SW_FAST_AGING;
+       ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+
+       data8 &= ~SW_FAST_AGING;
+       ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); }
+
+static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port, 
+bool flag) {
+       struct ksz_device *dev = ds->priv;
+
+       if (flag) {
+               ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+                            PORT_VLAN_LOOKUP_VID_0, true);
+               ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, true);
+               ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
+       } else {
+               ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
+               ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, false);
+               ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+                            PORT_VLAN_LOOKUP_VID_0, false);
+       }
+
+       return 0;
+}
+
+static int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
+                                const struct switchdev_obj_port_vlan *vlan,
+                                struct switchdev_trans *trans)
+{
+       /* nothing needed */
+
+       return 0;
+}
+
+static void ksz_port_vlan_add(struct dsa_switch *ds, int port,
+                             const struct switchdev_obj_port_vlan *vlan,
+                             struct switchdev_trans *trans) {
+       struct ksz_device *dev = ds->priv;
+       u32 vlan_table[3];
+       u16 vid;
+       bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+
+       for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+               if (get_vlan_table(ds, vid, vlan_table)) {
+                       dev_dbg(dev->dev, "Failed to get vlan table\n");
+                       return;
+               }
+
+               vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
+               if (untagged)
+                       vlan_table[1] |= BIT(port);
+               else
+                       vlan_table[1] &= ~BIT(port);
+               vlan_table[1] &= ~(BIT(dev->cpu_port));
+
+               vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
+
+               if (set_vlan_table(ds, vid, vlan_table)) {
+                       dev_dbg(dev->dev, "Failed to set vlan table\n");
+                       return;
+               }
+
+               /* change PVID */
+               if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+                       ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
+       }
+}
+
+static int ksz_port_vlan_del(struct dsa_switch *ds, int port,
+                            const struct switchdev_obj_port_vlan *vlan) {
+       struct ksz_device *dev = ds->priv;
+       bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+       u32 vlan_table[3];
+       u16 vid;
+       u16 pvid;
+
+       ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
+       pvid = pvid & 0xFFF;
+
+       for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+               if (get_vlan_table(ds, vid, vlan_table)) {
+                       dev_dbg(dev->dev, "Failed to get vlan table\n");
+                       return -ETIMEDOUT;
+               }
+
+               vlan_table[2] &= ~BIT(port);
+
+               if (pvid == vid)
+                       pvid = 1;
+
+               if (untagged)
+                       vlan_table[1] &= ~BIT(port);
+
+               if (set_vlan_table(ds, vid, vlan_table)) {
+                       dev_dbg(dev->dev, "Failed to set vlan table\n");
+                       return -ETIMEDOUT;
+               }
+       }
+
+       ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
+
+       return 0;
+}
+
+struct alu_struct {
+       /* entry 1 */
+       u8      is_static:1;
+       u8      is_src_filter:1;
+       u8      is_dst_filter:1;
+       u8      prio_age:3;
+       u32     _reserv_0_1:23;
+       u8      mstp:3;
+       /* entry 2 */
+       u8      is_override:1;
+       u8      is_use_fid:1;
+       u32     _reserv_1_1:23;
+       u8      port_forward:7;
+       /* entry 3 & 4*/
+       u32     _reserv_2_1:9;
+       u8      fid:7;
+       u8      mac[ETH_ALEN];
+};
+
+static int ksz_port_fdb_add(struct dsa_switch *ds, int port,
+                           const unsigned char *addr, u16 vid) {
+       struct ksz_device *dev = ds->priv;
+       u32 alu_table[4];
+       u32 data;
+       int ret = 0;
+
+       mutex_lock(&dev->alu_mutex);
+
+       /* find any entry with mac & vid */
+       data = vid << ALU_FID_INDEX_S;
+       data |= ((addr[0] << 8) | addr[1]);
+       ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+       data = ((addr[2] << 24) | (addr[3] << 16));
+       data |= ((addr[4] << 8) | addr[5]);
+       ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+       /* start read operation */
+       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+       /* wait to be finished */
+       ret = wait_alu_ready(dev, ALU_START, 1000);
+       if (ret < 0) {
+               dev_dbg(dev->dev, "Failed to read ALU\n");
+               goto exit;
+       }
+
+       /* read ALU entry */
+       read_table(ds, alu_table);
+
+       /* update ALU entry */
+       alu_table[0] = ALU_V_STATIC_VALID;
+       alu_table[1] |= BIT(port);
+       if (vid)
+               alu_table[1] |= ALU_V_USE_FID;
+       alu_table[2] = (vid << ALU_V_FID_S);
+       alu_table[2] |= ((addr[0] << 8) | addr[1]);
+       alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
+       alu_table[3] |= ((addr[4] << 8) | addr[5]);
+
+       write_table(ds, alu_table);
+
+       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+       /* wait to be finished */
+       ret = wait_alu_ready(dev, ALU_START, 1000);
+       if (ret < 0)
+               dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+       mutex_unlock(&dev->alu_mutex);
+
+       return ret;
+}
+
+static int ksz_port_fdb_del(struct dsa_switch *ds, int port,
+                           const unsigned char *addr, u16 vid) {
+       struct ksz_device *dev = ds->priv;
+       u32 alu_table[4];
+       u32 data;
+       int ret = 0;
+
+       mutex_lock(&dev->alu_mutex);
+
+       /* read any entry with mac & vid */
+       data = vid << ALU_FID_INDEX_S;
+       data |= ((addr[0] << 8) | addr[1]);
+       ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+       data = ((addr[2] << 24) | (addr[3] << 16));
+       data |= ((addr[4] << 8) | addr[5]);
+       ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+       /* start read operation */
+       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+       /* wait to be finished */
+       ret = wait_alu_ready(dev, ALU_START, 1000);
+       if (ret < 0) {
+               dev_dbg(dev->dev, "Failed to read ALU\n");
+               goto exit;
+       }
+
+       ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
+       if (alu_table[0] & ALU_V_STATIC_VALID) {
+               ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
+               ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
+               ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
+
+               /* clear forwarding port */
+               alu_table[2] &= ~BIT(port);
+
+               /* if there is no port to forward, clear table */
+               if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
+                       alu_table[0] = 0;
+                       alu_table[1] = 0;
+                       alu_table[2] = 0;
+                       alu_table[3] = 0;
+               }
+       } else {
+               alu_table[0] = 0;
+               alu_table[1] = 0;
+               alu_table[2] = 0;
+               alu_table[3] = 0;
+       }
+
+       write_table(ds, alu_table);
+
+       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+       /* wait to be finished */
+       ret = wait_alu_ready(dev, ALU_START, 1000);
+       if (ret < 0)
+               dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+       mutex_unlock(&dev->alu_mutex);
+
+       return ret;
+}
+
+static void convert_alu(struct alu_struct *alu, u32 *alu_table) {
+       alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
+       alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
+       alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
+       alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
+                       ALU_V_PRIO_AGE_CNT_M;
+       alu->mstp = alu_table[0] & ALU_V_MSTP_M;
+
+       alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
+       alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
+       alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
+
+       alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
+
+       alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
+       alu->mac[1] = alu_table[2] & 0xFF;
+       alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
+       alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
+       alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
+       alu->mac[5] = alu_table[3] & 0xFF;
+}
+
+static int ksz_port_fdb_dump(struct dsa_switch *ds, int port,
+                            dsa_fdb_dump_cb_t *cb, void *data) {
+       struct ksz_device *dev = ds->priv;
+       int ret = 0;
+       u32 ksz_data;
+       u32 alu_table[4];
+       struct alu_struct alu;
+       int timeout;
+
+       mutex_lock(&dev->alu_mutex);
+
+       /* start ALU search */
+       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
+
+       do {
+               timeout = 1000;
+               do {
+                       ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
+                       if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
+                               break;
+                       usleep_range(1, 10);
+               } while (timeout-- > 0);
+
+               if (!timeout) {
+                       dev_dbg(dev->dev, "Failed to search ALU\n");
+                       ret = -ETIMEDOUT;
+                       goto exit;
+               }
+
+               /* read ALU table */
+               read_table(ds, alu_table);
+
+               convert_alu(&alu, alu_table);
+
+               if (alu.port_forward & BIT(port)) {
+                       ret = cb(alu.mac, alu.fid, alu.is_static, data);
+                       if (ret)
+                               goto exit;
+               }
+       } while (ksz_data & ALU_START);
+
+exit:
+
+       /* stop ALU search */
+       ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
+
+       mutex_unlock(&dev->alu_mutex);
+
+       return ret;
+}
+
+static int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
+                               const struct switchdev_obj_port_mdb *mdb,
+                               struct switchdev_trans *trans)
+{
+       /* nothing to do */
+       return 0;
+}
+
+static void ksz_port_mdb_add(struct dsa_switch *ds, int port,
+                            const struct switchdev_obj_port_mdb *mdb,
+                            struct switchdev_trans *trans)
+{
+       struct ksz_device *dev = ds->priv;
+       u32 static_table[4];
+       u32 data;
+       int index;
+       u32 mac_hi, mac_lo;
+
+       mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+       mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+       mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+       mutex_lock(&dev->alu_mutex);
+
+       for (index = 0; index < dev->num_statics; index++) {
+               /* find empty slot first */
+               data = (index << ALU_STAT_INDEX_S) |
+                       ALU_STAT_READ | ALU_STAT_START;
+               ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+               /* wait to be finished */
+               if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) {
+                       dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+                       goto exit;
+               }
+
+               /* read ALU static table */
+               read_table(ds, static_table);
+
+               if (static_table[0] & ALU_V_STATIC_VALID) {
+                       /* check this has same vid & mac address */
+                       if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+                           ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+                           static_table[3] == mac_lo) {
+                               /* found matching one */
+                               break;
+                       }
+               } else {
+                       /* found empty one */
+                       break;
+               }
+       }
+
+       /* no available entry */
+       if (index == dev->num_statics)
+               goto exit;
+
+       /* add entry */
+       static_table[0] = ALU_V_STATIC_VALID;
+       static_table[1] |= BIT(port);
+       if (mdb->vid)
+               static_table[1] |= ALU_V_USE_FID;
+       static_table[2] = (mdb->vid << ALU_V_FID_S);
+       static_table[2] |= mac_hi;
+       static_table[3] = mac_lo;
+
+       write_table(ds, static_table);
+
+       data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+       ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+       /* wait to be finished */
+       if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0)
+               dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+       mutex_unlock(&dev->alu_mutex);
+}
+
+static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
+                           const struct switchdev_obj_port_mdb *mdb) {
+       struct ksz_device *dev = ds->priv;
+       u32 static_table[4];
+       u32 data;
+       int index;
+       int ret = 0;
+       u32 mac_hi, mac_lo;
+
+       mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+       mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+       mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+       mutex_lock(&dev->alu_mutex);
+
+       for (index = 0; index < dev->num_statics; index++) {
+               /* find empty slot first */
+               data = (index << ALU_STAT_INDEX_S) |
+                       ALU_STAT_READ | ALU_STAT_START;
+               ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+               /* wait to be finished */
+               ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
+               if (ret < 0) {
+                       dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+                       goto exit;
+               }
+
+               /* read ALU static table */
+               read_table(ds, static_table);
+
+               if (static_table[0] & ALU_V_STATIC_VALID) {
+                       /* check this has same vid & mac address */
+
+                       if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+                           ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+                           static_table[3] == mac_lo) {
+                               /* found matching one */
+                               break;
+                       }
+               }
+       }
+
+       /* no available entry */
+       if (index == dev->num_statics) {
+               ret = -EINVAL;
+               goto exit;
+       }
+
+       /* clear port */
+       static_table[1] &= ~BIT(port);
+
+       if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
+               /* delete entry */
+               static_table[0] = 0;
+               static_table[1] = 0;
+               static_table[2] = 0;
+               static_table[3] = 0;
+       }
+
+       write_table(ds, static_table);
+
+       data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+       ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+       /* wait to be finished */
+       ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
+       if (ret < 0)
+               dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+       mutex_unlock(&dev->alu_mutex);
+
+       return ret;
+}
+
+static int ksz_port_mirror_add(struct dsa_switch *ds, int port,
+                              struct dsa_mall_mirror_tc_entry *mirror,
+                              bool ingress)
+{
+       struct ksz_device *dev = ds->priv;
+
+       if (ingress)
+               ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+       else
+               ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+
+       ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
+
+       /* configure mirror port */
+       ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+                    PORT_MIRROR_SNIFFER, true);
+
+       ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+       return 0;
+}
+
+static void ksz_port_mirror_del(struct dsa_switch *ds, int port,
+                               struct dsa_mall_mirror_tc_entry *mirror) {
+       struct ksz_device *dev = ds->priv;
+       u8 data;
+
+       if (mirror->ingress)
+               ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+       else
+               ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+
+       ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+
+       if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
+               ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+                            PORT_MIRROR_SNIFFER, false);
+}
+
+static const struct dsa_switch_ops ksz_switch_ops = {
+       .get_tag_protocol       = ksz_get_tag_protocol,
+       .setup                  = ksz_setup,
+       .phy_read               = ksz_phy_read16,
+       .phy_write              = ksz_phy_write16,
+       .port_enable            = ksz_enable_port,
+       .port_disable           = ksz_disable_port,
+       .get_strings            = ksz_get_strings,
+       .get_ethtool_stats      = ksz_get_ethtool_stats,
+       .get_sset_count         = ksz_sset_count,
+       .port_stp_state_set     = ksz_port_stp_state_set,
+       .port_fast_age          = ksz_port_fast_age,
+       .port_vlan_filtering    = ksz_port_vlan_filtering,
+       .port_vlan_prepare      = ksz_port_vlan_prepare,
+       .port_vlan_add          = ksz_port_vlan_add,
+       .port_vlan_del          = ksz_port_vlan_del,
+       .port_fdb_dump          = ksz_port_fdb_dump,
+       .port_fdb_add           = ksz_port_fdb_add,
+       .port_fdb_del           = ksz_port_fdb_del,
+       .port_mdb_prepare       = ksz_port_mdb_prepare,
+       .port_mdb_add           = ksz_port_mdb_add,
+       .port_mdb_del           = ksz_port_mdb_del,
+       .port_mirror_add        = ksz_port_mirror_add,
+       .port_mirror_del        = ksz_port_mirror_del,
+};
+
+static u32 ksz_get_port_addr(int port, int offset) {
+       return PORT_CTRL_ADDR(port, offset);
+}
+
+/* For Ingress (Host -> KSZ), 2 bytes are added before FCS.
+ * 
+-----------------------------------------------------------------------
+----
+ * 
+DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|tag1(1byte)|FCS(4by
+tes)
+ * 
+-----------------------------------------------------------------------
+----
+ * tag0 : Prioritization (not used now)
+ * tag1 : each bit represents port (eg, 0x01=port1, 0x02=port2, 
+0x10=port5)
+ *
+ * For Egress (KSZ -> Host), 1 byte is added before FCS.
+ * 
+-----------------------------------------------------------------------
+----
+ * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|FCS(4bytes)
+ * 
+-----------------------------------------------------------------------
+----
+ * tag0 : zero-based value represents port
+ *       (eg, 0x00=port1, 0x02=port3, 0x06=port7)
+ */
+
+#define        KSZ_INGRESS_TAG_LEN     2
+#define        KSZ_EGRESS_TAG_LEN      1
+#define KSZ_PTP_TAG_LEN                4
+#define KSZ_PTP_TAG_INDICATION 0x80
+
+/**
+ * This information needs to be communicated to the MAC driver so that 
+it can
+ * receive the frames correctly from the switch as some MAC drivers 
+adhere to
+ * receive exactly 1518 bytes.
+ */
+static int ksz_get_rx_len(struct ksz_device *dev) {
+       int len = KSZ_EGRESS_TAG_LEN;
+
+       /* PTP function is turned on. */
+       if (dev->overrides & PTP_TAG)
+               len += KSZ_PTP_TAG_LEN;
+       return len;
+}
+
+/**
+ * This information tells how many more bytes need to be allocated to
+ * accommodate the tail tag.
+ */
+static int ksz_get_tx_len(struct ksz_device *dev) {
+       int len = KSZ_INGRESS_TAG_LEN;
+
+       /* PTP function is turned on. */
+       if (dev->overrides & PTP_TAG)
+               len += KSZ_PTP_TAG_LEN;
+       return len;
+}
+
+static void ksz_add_tail_tag(struct ksz_device *dev, struct sk_buff *skb,
+                            int port)
+{
+       struct {
+               u32 timestamp;
+               u16 ports;
+       } tx_tag;
+       u8 *trailer;
+       u8 *tag;
+       int len = KSZ_INGRESS_TAG_LEN;
+       int ptp_len = 0;
+
+       port = 1 << port;
+
+       /* PTP function is turned on. */
+       if (dev->overrides & PTP_TAG)
+               ptp_len = KSZ_PTP_TAG_LEN;
+       len += ptp_len;
+       trailer = skb_put(skb, len);
+       memset(&tx_tag, 0, sizeof(tx_tag));
+       tx_tag.ports = port & dev->PORT_MASK;
+       tx_tag.ports = cpu_to_be16(tx_tag.ports);
+       tag = (u8 *)&tx_tag;
+       memcpy(trailer, &tag[4 - ptp_len], ptp_len + KSZ_INGRESS_TAG_LEN); }
+
+static int ksz_get_tail_tag(struct ksz_device *dev, struct sk_buff *skb,
+                           int *port)
+{
+       u8 *trailer;
+       int len = KSZ_EGRESS_TAG_LEN;
+
+       trailer = skb_tail_pointer(skb) - len;
+       if (*trailer & KSZ_PTP_TAG_INDICATION)
+               len += KSZ_PTP_TAG_LEN;
+       *trailer &= ~KSZ_PTP_TAG_INDICATION;
+       *port = *trailer;
+       if (*port >= 0 && *port < dev->mib_port_cnt) {
+               struct ksz_port *p = &dev->ports[*port];
+
+               /**
+                * Switch is forwarding when port membership includes other
+                * ports.
+                */
+               if (p->member & ~((1 << *port) | dev->HOST_MASK))
+                       skb->offload_fwd_mark = 1;
+       }
+       return len;
+}
+
+static int ksz_switch_detect(struct ksz_device *dev) {
+       u8 data8;
+       u32 id32;
+       int ret;
+
+       /* turn off SPI DO Edge select */
+       ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+       if (ret)
+               return ret;
+
+       data8 &= ~SPI_AUTO_EDGE_DETECTION;
+       ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+       if (ret)
+               return ret;
+
+       /* read chip id */
+       ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
+       if (ret)
+               return ret;
+
+       /* Number of ports can be reduced depending on chip. */
+       dev->mib_port_cnt = TOTAL_PORT_NUM;
+
+       dev->chip_id = id32;
+
+       dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
+
+       /* Try to read MIB counters in all ports every second. */
+       dev->MIB_READ_INTERVAL = msecs_to_jiffies(1000 / dev->mib_port_cnt);
+
+       return 0;
+}
+
+struct ksz_chip_data {
+       u32 chip_id;
+       const char *dev_name;
+       int num_vlans;
+       int num_alus;
+       int num_statics;
+       int cpu_ports;
+       int port_cnt;
+};
+
+static const struct ksz_chip_data ksz_switch_chips[] = {
+       {
+               .chip_id = 0x00947700,
+               .dev_name = "KSZ9477",
+               .num_vlans = 4096,
+               .num_alus = 4096,
+               .num_statics = 16,
+               .cpu_ports = 0x7F,      /* can be configured as cpu port */
+               .port_cnt = 7,          /* total physical port count */
+       },
+};
+
+static int ksz_switch_init(struct ksz_device *dev) {
+       int i;
+
+       mutex_init(&dev->reg_mutex);
+       mutex_init(&dev->stats_mutex);
+       mutex_init(&dev->alu_mutex);
+       mutex_init(&dev->vlan_mutex);
+
+       dev->ds->ops = &ksz_switch_ops;
+
+       for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) {
+               const struct ksz_chip_data *chip = &ksz_switch_chips[i];
+
+               if (dev->chip_id == chip->chip_id) {
+                       dev->name = chip->dev_name;
+                       dev->num_vlans = chip->num_vlans;
+                       dev->num_alus = chip->num_alus;
+                       dev->num_statics = chip->num_statics;
+                       dev->port_cnt = chip->port_cnt;
+                       dev->cpu_ports = chip->cpu_ports;
+
+                       break;
+               }
+       }
+
+       /* no switch found */
+       if (!dev->port_cnt)
+               return -ENODEV;
+
+       dev->PORT_MASK = (1 << dev->port_cnt) - 1;
+       dev->PORT_MASK |= dev->HOST_MASK;
+
+       i = dev->mib_port_cnt;
+       dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i,
+                                 GFP_KERNEL);
+       if (!dev->ports)
+               return -ENOMEM;
+       for (i = 0; i < dev->mib_port_cnt; i++) {
+               dev->ports[i].mib.info =
+                       devm_kzalloc(dev->dev,
+                                    sizeof(struct ksz_port_mib_info) *
+                                    TOTAL_SWITCH_COUNTER_NUM, GFP_KERNEL);
+               if (!dev->ports[i].mib.info)
+                       return -ENOMEM;
+       }
+
+       return 0;
+}
+
+static void ksz_switch_exit(struct ksz_device *dev) { }
+
+static const struct ksz_dev_ops ksz9477_dev_ops = {
+       .get_port_addr = ksz_get_port_addr,
+       .reset = ksz_reset_switch,
+       .get_rx_len = ksz_get_rx_len,
+       .get_tx_len = ksz_get_tx_len,
+       .add_tail_tag = ksz_add_tail_tag,
+       .get_tail_tag = ksz_get_tail_tag,
+       .detect = ksz_switch_detect,
+       .init = ksz_switch_init,
+       .exit = ksz_switch_exit,
+};
+
+int ksz9477_switch_register(struct ksz_device *dev) {
+       return ksz_switch_register(dev, &ksz9477_dev_ops); } 
+EXPORT_SYMBOL(ksz9477_switch_register);
+
+MODULE_AUTHOR("Woojung Huh <woojung....@microchip.com>"); 
+MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver"); 
+MODULE_LICENSE("GPL");

Reply via email to