On 09/08/2017 06:02 AM, Kunihiko Hayashi wrote:
> From: Jassi Brar <jaswinder.si...@linaro.org>
>
> Add RTL8201F phy-id and the related functions to the driver.
>
> The original patch is as follows:
> https://patchwork.kernel.org/patch/2538341/
>
> Signed-off-by: Jongsung Kim <neidhard....@lge.com>
> Signed-off-by: Jassi Brar <jaswinder.si...@linaro.org>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunih...@socionext.com>
> ---
> drivers/net/phy/realtek.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index 9cbe645..d9974ce 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -29,10 +29,23 @@
> #define RTL8211F_PAGE_SELECT 0x1f
> #define RTL8211F_TX_DELAY 0x100
>
> +#define RTL8201F_ISR 0x1e
> +#define RTL8201F_PAGE_SELECT 0x1f
We have a page select register define for the RTL8211F right above, so
surely we can make that a common definition?
> +#define RTL8201F_IER 0x13
> +
> MODULE_DESCRIPTION("Realtek PHY driver");
> MODULE_AUTHOR("Johnson Leung");
> MODULE_LICENSE("GPL");
>
> +static int rtl8201_ack_interrupt(struct phy_device *phydev)
> +{
> + int err;
> +
> + err = phy_read(phydev, RTL8201F_ISR);
> +
> + return (err < 0) ? err : 0;
> +}
> +
> static int rtl821x_ack_interrupt(struct phy_device *phydev)
> {
> int err;
> @@ -54,6 +67,25 @@ static int rtl8211f_ack_interrupt(struct phy_device
> *phydev)
> return (err < 0) ? err : 0;
> }
>
> +static int rtl8201_config_intr(struct phy_device *phydev)
> +{
> + int err;
> +
> + /* switch to page 7 */
> + phy_write(phydev, RTL8201F_PAGE_SELECT, 0x7);
> +
> + if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
> + err = phy_write(phydev, RTL8201F_IER,
> + BIT(13) | BIT(12) | BIT(11));
Can you detail what bits 11, 12 and 13 do? Do they correspond to link,
duplex and pause changes by any chance?
> + else
> + err = phy_write(phydev, RTL8201F_IER, 0);
> +
> + /* restore to default page 0 */
> + phy_write(phydev, RTL8201F_PAGE_SELECT, 0x0);
> +
> + return err;
> +}
> +
Other than that, LGTM:
Reviewed-by: Florian Fainelli <f.faine...@gmail.com>
> static int rtl8211b_config_intr(struct phy_device *phydev)
> {
> int err;
> @@ -129,6 +161,18 @@ static struct phy_driver realtek_drvs[] = {
> .config_aneg = &genphy_config_aneg,
> .read_status = &genphy_read_status,
> }, {
> + .phy_id = 0x001cc816,
> + .name = "RTL8201F 10/100Mbps Ethernet",
> + .phy_id_mask = 0x001fffff,
> + .features = PHY_BASIC_FEATURES,
> + .flags = PHY_HAS_INTERRUPT,
> + .config_aneg = &genphy_config_aneg,
> + .read_status = &genphy_read_status,
> + .ack_interrupt = &rtl8201_ack_interrupt,
> + .config_intr = &rtl8201_config_intr,
> + .suspend = genphy_suspend,
> + .resume = genphy_resume,
> + }, {
> .phy_id = 0x001cc912,
> .name = "RTL8211B Gigabit Ethernet",
> .phy_id_mask = 0x001fffff,
> @@ -181,6 +225,7 @@ static struct phy_driver realtek_drvs[] = {
> module_phy_driver(realtek_drvs);
>
> static struct mdio_device_id __maybe_unused realtek_tbl[] = {
> + { 0x001cc816, 0x001fffff },
> { 0x001cc912, 0x001fffff },
> { 0x001cc914, 0x001fffff },
> { 0x001cc915, 0x001fffff },
>
--
Florian
