Signed-off-by: Bernd Edlinger <bernd.edlin...@hotmail.de>
---
drivers/net/phy/Kconfig | 5 +++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/uPD60620.c | 109 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 115 insertions(+)
create mode 100644 drivers/net/phy/uPD60620.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index cd931cf..e2cf8ff 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -366,6 +366,11 @@ config REALTEK_PHY
---help---
Supports the Realtek 821x PHY.
+config RENESAS_PHY
+ tristate "Driver for Renesas PHYs"
+ ---help---
+ Supports the Renesas PHYs uPD60620 and uPD60620A.
+
config ROCKCHIP_PHY
tristate "Driver for Rockchip Ethernet PHYs"
---help---
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 416df92..1404ad3 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_RENESAS_PHY) += uPD60620.o
obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o
obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
diff --git a/drivers/net/phy/uPD60620.c b/drivers/net/phy/uPD60620.c
new file mode 100644
index 0000000..96b3347
--- /dev/null
+++ b/drivers/net/phy/uPD60620.c
@@ -0,0 +1,109 @@
+/*
+ * Driver for the Renesas PHY uPD60620.
+ *
+ * Copyright (C) 2015 Softing Industrial Automation GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define UPD60620_PHY_ID 0xb8242824
+
+/* Extended Registers and values */
+/* PHY Special Control/Status */
+#define PHY_PHYSCR 0x1F /* PHY.31 */
+#define PHY_PHYSCR_10MB 0x0004 /* PHY speed = 10mb */
+#define PHY_PHYSCR_100MB 0x0008 /* PHY speed = 100mb */
+#define PHY_PHYSCR_DUPLEX 0x0010 /* PHY Duplex */
+
+/* PHY Special Modes */
+#define PHY_SPM 0x12 /* PHY.18 */
+
+/* Init PHY */
+
+static int upd60620_config_init(struct phy_device *phydev)
+{
+ /* Enable support for passive HUBs (could be a strap option) */
+ /* PHYMODE: All speeds, HD in parallel detect */
+ return phy_write(phydev, PHY_SPM, 0x0180 | phydev->mdio.addr);
+}
+
+/* Get PHY status from common registers */
+
+static int upd60620_read_status(struct phy_device *phydev)
+{
+ int phy_state;
+
+ /* Read negotiated state */
+ phy_state = phy_read(phydev, MII_BMSR);
+ if (phy_state < 0)
+ return phy_state;
+
+ phydev->link = 0;
+ phydev->lp_advertising = 0;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ if (phy_state & (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) {
+ phy_state = phy_read(phydev, PHY_PHYSCR);
+ if (phy_state < 0)
+ return phy_state;
+
+ if (phy_state & (PHY_PHYSCR_10MB | PHY_PHYSCR_100MB)) {
+ phydev->link = 1;
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+
+ if (phy_state & PHY_PHYSCR_100MB)
+ phydev->speed = SPEED_100;
+ if (phy_state & PHY_PHYSCR_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+
+ phy_state = phy_read(phydev, MII_LPA);
+ if (phy_state < 0)
+ return phy_state;
+
+ phydev->lp_advertising
+ = mii_lpa_to_ethtool_lpa_t(phy_state);
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ if (phy_state & LPA_PAUSE_CAP)
+ phydev->pause = 1;
+ if (phy_state & LPA_PAUSE_ASYM)
+ phydev->asym_pause = 1;
+ }
+ }
+ }
+ return 0;
+}
+
+MODULE_DESCRIPTION("Renesas uPD60620 PHY driver");
+MODULE_AUTHOR("Bernd Edlinger <bernd.edlin...@hotmail.de>");
+MODULE_LICENSE("GPL");
+
+static struct phy_driver upd60620_driver[1] = { {
+ .phy_id = UPD60620_PHY_ID,
+ .phy_id_mask = 0xfffffffe,
+ .name = "Renesas uPD60620",
+ .features = PHY_BASIC_FEATURES,
+ .flags = 0,
+ .config_init = upd60620_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = upd60620_read_status,
+} };
+
+module_phy_driver(upd60620_driver);
+
+static struct mdio_device_id __maybe_unused upd60620_tbl[] = {
+ { UPD60620_PHY_ID, 0xfffffffe },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, upd60620_tbl);
--
1.9.1
