On Fri, 27 Oct 2017 02:37:44 -0700 Amritha Nambiar <[email protected]> wrote:
> Use the classid values reserved in the range :ffe0 - :ffef > to identify hardware traffic classes. > > Example: > Match Dst IPv4,Dst Port and route to TC1: > # tc filter add dev eth0 protocol ip parent ffff:\ > prio 1 flower dst_ip 192.168.1.1/32\ > ip_proto udp dst_port 12000 skip_sw\ > hw_tc 1 > > # tc filter show dev eth0 parent ffff: > filter pref 1 flower chain 0 > filter pref 1 flower chain 0 handle 0x1 hw_tc 1 > eth_type ipv4 > ip_proto udp > dst_ip 192.168.1.1 > dst_port 12000 > skip_sw > in_hw > > Signed-off-by: Amritha Nambiar <[email protected]> Not sure. Using reserved values can lead to future problems, but this might be only simple way to handle this.
