[PATCH net-next 3/4] net: phy: sfp: Separate enumerations and states

[Florian Fainelli]

Create separate enumerations for the SFP physical state (computed from GPIOs),
device state, module state, and actual state machine. This will make it easier
to make sure the correct states are used, and also pretty print those to help
debugging.

Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
 drivers/net/phy/sfp.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index dfb28b269687..e4662bc58c01 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -23,13 +23,17 @@ enum {
        GPIO_TX_DISABLE,
        GPIO_RATE_SELECT,
        GPIO_MAX,
+};
 
+enum sfp_f_state {
        SFP_F_PRESENT = BIT(GPIO_MODDEF0),
        SFP_F_LOS = BIT(GPIO_LOS),
        SFP_F_TX_FAULT = BIT(GPIO_TX_FAULT),
        SFP_F_TX_DISABLE = BIT(GPIO_TX_DISABLE),
        SFP_F_RATE_SELECT = BIT(GPIO_RATE_SELECT),
+};
 
+enum sfp_event_state {
        SFP_E_INSERT = 0,
        SFP_E_REMOVE,
        SFP_E_DEV_DOWN,
@@ -39,15 +43,21 @@ enum {
        SFP_E_LOS_HIGH,
        SFP_E_LOS_LOW,
        SFP_E_TIMEOUT,
+};
 
+enum sfp_mod_state {
        SFP_MOD_EMPTY = 0,
        SFP_MOD_PROBE,
        SFP_MOD_PRESENT,
        SFP_MOD_ERROR,
+};
 
+enum sfp_dev_state {
        SFP_DEV_DOWN = 0,
        SFP_DEV_UP,
+};
 
+enum sfp_sm_state {
        SFP_S_DOWN = 0,
        SFP_S_INIT,
        SFP_S_WAIT_LOS,
@@ -115,9 +125,9 @@ struct sfp {
        struct delayed_work poll;
        struct delayed_work timeout;
        struct mutex sm_mutex;
-       unsigned char sm_mod_state;
-       unsigned char sm_dev_state;
-       unsigned short sm_state;
+       enum sfp_mod_state sm_mod_state;
+       enum sfp_dev_state sm_dev_state;
+       enum sfp_sm_state sm_state;
        unsigned int sm_retries;
 
        struct sfp_eeprom_id id;
-- 
2.14.1