On Thu, Nov 09, 2017 at 10:13:15PM +0100, Andrew Lunn wrote: > On Thu, Nov 09, 2017 at 12:35:32PM -0800, Florian Fainelli wrote: > > +Ido, Jiri, > > > > On 11/09/2017 12:21 PM, Andrew Lunn wrote: > > > On Thu, Nov 09, 2017 at 11:38:26AM -0800, Florian Fainelli wrote: > > >> On 11/09/2017 11:30 AM, Andrew Lunn wrote: > > >>>> This means that switchdev drivers won't ever have to treat a HOST_MDB > > >>>> notification any differently than a PORT_MDB notification > > >>> > > >>> No, they need to treat it very differently. > > >> > > >> Allow me to rephrase, switchdev drivers will ignore HOST_MDB > > >> notifications because that does not resolve to something they can do > > >> something about. > > > > > > Hi Florian > > > > > > Yes, they can. In fact, if they want to support IGMP snooping on the > > > bridge interface, they have to. How else do they know to forward > > > traffic to the host? > > > > On a switchdev fabric, you need to have at least one user-facing port be > > a member of the bridge, and when the switchdev driver configures that, > > it should just make the IGMP packets trap to the management interface > > such that they can be delivered from the port member to the bridge > > network device (br0). In that case, I don't really see why you would > > need to send a HOST_MDB message to a switchdev fabric, since that should > > be part of enslaving the port to the bridge in the first place and > > appropriately configure the management interface to get IGMP snooping, > > BDPU etc. > > So your network is carrying gigabits of multicast traffic. Are you > saying it should all hit the host, so the bridge can throw it away? > No, it is much more efficient that the bridge tells the switch when it > is interested in a specific multicast group. I.e. it sends a HOST_MDB > request for the group. Only then will the switch start to send the > data for that group to the host.
Yep. We already have support for marking br0 as router port which means the bridge driver will get both unregistered multicast packets and packets hitting mdb entries. With your patch, we'll need to add the ability to get only packets hitting a specific mdb entry which should be trivial enough. Florian, you're right that by default IGMP (control) packets are trapped to the bridge driver, but Andrew's set adds the ability to trap the _data_ packets hitting a specific mdb entry.
