[PATCH net-next 5/5] net: phy: phylink: Report MoCA as PORT_BNC

[Florian Fainelli]

Similarly to what PHYLIB already does, make sure that
PHY_INTERFACE_MODE_MOCA is reported as PORT_BNC.

Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
 drivers/net/phy/phylink.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 0a8fd9aa1a19..20c48fbebdfb 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -525,7 +525,10 @@ struct phylink *phylink_create(struct net_device *ndev, 
struct device_node *np,
        pl->netdev = ndev;
        pl->phy_state.interface = iface;
        pl->link_interface = iface;
-       pl->link_port = PORT_MII;
+       if (iface == PHY_INTERFACE_MODE_MOCA)
+               pl->link_port = PORT_BNC;
+       else
+               pl->link_port = PORT_MII;
        pl->link_config.interface = iface;
        pl->link_config.pause = MLO_PAUSE_AN;
        pl->link_config.speed = SPEED_UNKNOWN;
-- 
2.14.3