e1000e_check_for_copper_link() and e1000_check_for_copper_link_ich8lan()
are the two functions that may be assigned to mac.ops.check_for_link when
phy.media_type == e1000_media_type_copper. Commit 19110cfbb34d ("e1000e:
Separate signaling for link check/link up") changed the meaning of the
return value of check_for_link for copper media but only adjusted the first
function. This patch adjusts the second function likewise.Reported-by: Christian Hesse <l...@eworm.de> Reported-by: Gabriel C <nix.or....@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=198047 Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up") Tested-by: Christian Hesse <l...@eworm.de> Signed-off-by: Benjamin Poirier <bpoir...@suse.com> --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index d6d4ed7acf03..31277d3bb7dc 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1367,6 +1367,9 @@ static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force) * Checks to see of the link status of the hardware has changed. If a * change in link status has been detected, then we read the PHY registers * to get the current speed/duplex if link exists. + * + * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link + * up). **/ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) { @@ -1382,7 +1385,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * Change or Rx Sequence Error interrupt. */ if (!mac->get_link_status) - return 0; + return 1; /* First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex @@ -1613,10 +1616,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * different link partner. */ ret_val = e1000e_config_fc_after_link_up(hw); - if (ret_val) + if (ret_val) { e_dbg("Error configuring flow control\n"); + return ret_val; + } - return ret_val; + return 1; } static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) -- 2.15.1
