From: Siva Reddy Kallam <[email protected]> A customer noticed RX path hang when MTU is changed on the fly while running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720 belongs to same ASIC family, we observed same issue and same fix could solve this problem for 5720.
Signed-off-by: Siva Reddy Kallam <[email protected]> Signed-off-by: Michael Chan <[email protected]> --- drivers/net/ethernet/broadcom/tg3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index a0caa71..8995cfe 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14239,7 +14239,8 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) */ if (tg3_asic_rev(tp) == ASIC_REV_57766 || tg3_asic_rev(tp) == ASIC_REV_5717 || - tg3_asic_rev(tp) == ASIC_REV_5719) + tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) reset_phy = true; err = tg3_restart_hw(tp, reset_phy); -- 2.1.0
