On Wed, Jan 10, 2018 at 8:03 PM, Christoph Hellwig <h...@lst.de> wrote:
> We need to pass a struct device to the dma API, even if some
> architectures still support that for legacy reasons, and should not mix
> it with the old PCI dma API.
>
> Note that the driver also seems to never actually unmap its dma mappings,
> but to fix that we'll need someone more familar with the driver.
> + struct platform_device *pdev;
Do you really need platform_defice reference?
Perhaps
struct device *hdev; // hardware device
data->hdev = &pdev->dev;
Another idea
dev->dev.parent = &pdev->dev;
No new member needed.
> };
>
> /* Structure for a device driver */
> @@ -703,17 +705,18 @@ static int tsi108_send_packet(struct sk_buff * skb,
> struct net_device *dev)
> data->txskbs[tx] = skb;
>
> if (i == 0) {
> - data->txring[tx].buf0 = dma_map_single(NULL,
> skb->data,
> - skb_headlen(skb), DMA_TO_DEVICE);
> + data->txring[tx].buf0 =
> dma_map_single(&data->pdev->dev,
> + skb->data, skb_headlen(skb),
> + DMA_TO_DEVICE);
> data->txring[tx].len = skb_headlen(skb);
> misc |= TSI108_TX_SOF;
> } else {
> const skb_frag_t *frag = &skb_shinfo(skb)->frags[i -
> 1];
>
> - data->txring[tx].buf0 = skb_frag_dma_map(NULL, frag,
> - 0,
> -
> skb_frag_size(frag),
> -
> DMA_TO_DEVICE);
> + data->txring[tx].buf0 =
> + skb_frag_dma_map(&data->pdev->dev, frag,
> + 0, skb_frag_size(frag),
> + DMA_TO_DEVICE);
> data->txring[tx].len = skb_frag_size(frag);
> }
>
> @@ -808,9 +811,9 @@ static int tsi108_refill_rx(struct net_device *dev, int
> budget)
> if (!skb)
> break;
>
> - data->rxring[rx].buf0 = dma_map_single(NULL, skb->data,
> - TSI108_RX_SKB_SIZE,
> - DMA_FROM_DEVICE);
> + data->rxring[rx].buf0 = dma_map_single(&data->pdev->dev,
> + skb->data, TSI108_RX_SKB_SIZE,
> + DMA_FROM_DEVICE);
>
> /* Sometimes the hardware sets blen to zero after packet
> * reception, even though the manual says that it's only ever
> @@ -1308,15 +1311,15 @@ static int tsi108_open(struct net_device *dev)
> data->id, dev->irq, dev->name);
> }
>
> - data->rxring = dma_zalloc_coherent(NULL, rxring_size, &data->rxdma,
> - GFP_KERNEL);
> + data->rxring = dma_zalloc_coherent(&data->pdev->dev, rxring_size,
> + &data->rxdma, GFP_KERNEL);
> if (!data->rxring)
> return -ENOMEM;
>
> - data->txring = dma_zalloc_coherent(NULL, txring_size, &data->txdma,
> - GFP_KERNEL);
> + data->txring = dma_zalloc_coherent(&data->pdev->dev, txring_size,
> + &data->txdma, GFP_KERNEL);
> if (!data->txring) {
> - pci_free_consistent(NULL, rxring_size, data->rxring,
> + dma_free_coherent(&data->pdev->dev, rxring_size, data->rxring,
> data->rxdma);
> return -ENOMEM;
> }
> @@ -1428,10 +1431,10 @@ static int tsi108_close(struct net_device *dev)
> dev_kfree_skb(skb);
> }
>
> - dma_free_coherent(0,
> + dma_free_coherent(&data->pdev->dev,
> TSI108_RXRING_LEN * sizeof(rx_desc),
> data->rxring, data->rxdma);
> - dma_free_coherent(0,
> + dma_free_coherent(&data->pdev->dev,
> TSI108_TXRING_LEN * sizeof(tx_desc),
> data->txring, data->txdma);
>
> @@ -1576,6 +1579,7 @@ tsi108_init_one(struct platform_device *pdev)
> printk("tsi108_eth%d: probe...\n", pdev->id);
> data = netdev_priv(dev);
> data->dev = dev;
> + data->pdev = pdev;
>
>
> pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n",
> pdev->id, einfo->regs, einfo->phyregs,
> --
> 2.14.2
>
--
With Best Regards,
Andy Shevchenko
