From: Avinash Dayanand <avinash.dayan...@intel.com>

This patch handles the request from ADq enabled VF to allocate
bandwidth to each traffic class which means for each VSI.

Signed-off-by: Avinash Dayanand <avinash.dayan...@intel.com>
Tested-by: Andrew Bowers <andrewx.bow...@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 56 ++++++++++++++++++++--
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |  1 +
 2 files changed, 54 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c 
b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index a5565d07f569..b4bad70c82cd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -711,6 +711,7 @@ static int i40e_alloc_vsi_res(struct i40e_vf *vf, u8 idx)
        struct i40e_mac_filter *f = NULL;
        struct i40e_pf *pf = vf->pf;
        struct i40e_vsi *vsi;
+       u64 max_tx_rate = 0;
        int ret = 0;
 
        vsi = i40e_vsi_setup(pf, I40E_VSI_SRIOV, pf->vsi[pf->lan_vsi]->seid,
@@ -770,8 +771,15 @@ static int i40e_alloc_vsi_res(struct i40e_vf *vf, u8 idx)
 
        /* Set VF bandwidth if specified */
        if (vf->tx_rate) {
+               max_tx_rate = vf->tx_rate;
+       } else if (vf->ch[idx].max_tx_rate) {
+               max_tx_rate = vf->ch[idx].max_tx_rate;
+       }
+
+       if (max_tx_rate) {
+               max_tx_rate = div_u64(max_tx_rate, I40E_BW_CREDIT_DIVISOR);
                ret = i40e_aq_config_vsi_bw_limit(&pf->hw, vsi->seid,
-                                                 vf->tx_rate / 50, 0, NULL);
+                                                 max_tx_rate, 0, NULL);
                if (ret)
                        dev_err(&pf->pdev->dev, "Unable to set tx rate, VF %d, 
error code %d.\n",
                                vf->vf_id, ret);
@@ -2918,7 +2926,8 @@ static int i40e_vc_add_qch_msg(struct i40e_vf *vf, u8 
*msg)
        struct virtchnl_tc_info *tci =
                (struct virtchnl_tc_info *)msg;
        struct i40e_pf *pf = vf->pf;
-       int i, adq_request_qps = 0;
+       struct i40e_link_status *ls = &pf->hw.phy.link_info;
+       int i, adq_request_qps = 0, speed = 0;
        i40e_status aq_ret = 0;
 
        if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
@@ -2979,10 +2988,51 @@ static int i40e_vc_add_qch_msg(struct i40e_vf *vf, u8 
*msg)
                vf->num_queue_pairs = I40E_MAX_VF_QUEUES;
        }
 
+       /* get link speed in MB to validate rate limit */
+       switch (ls->link_speed) {
+       case VIRTCHNL_LINK_SPEED_100MB:
+               speed = SPEED_100;
+               break;
+       case VIRTCHNL_LINK_SPEED_1GB:
+               speed = SPEED_1000;
+               break;
+       case VIRTCHNL_LINK_SPEED_10GB:
+               speed = SPEED_10000;
+               break;
+       case VIRTCHNL_LINK_SPEED_20GB:
+               speed = SPEED_20000;
+               break;
+       case VIRTCHNL_LINK_SPEED_25GB:
+               speed = SPEED_25000;
+               break;
+       case VIRTCHNL_LINK_SPEED_40GB:
+               speed = SPEED_40000;
+               break;
+       default:
+               dev_err(&pf->pdev->dev,
+                       "Cannot detect link speed\n");
+               aq_ret = I40E_ERR_PARAM;
+               goto err;
+       }
+
        /* parse data from the queue channel info */
        vf->num_tc = tci->num_tc;
-       for (i = 0; i < vf->num_tc; i++)
+       for (i = 0; i < vf->num_tc; i++) {
+               if (tci->list[i].max_tx_rate) {
+                       if (tci->list[i].max_tx_rate > speed) {
+                               dev_err(&pf->pdev->dev,
+                                       "Invalid max tx rate %llu specified for 
VF %d.",
+                                       tci->list[i].max_tx_rate,
+                                       vf->vf_id);
+                               aq_ret = I40E_ERR_PARAM;
+                               goto err;
+                       } else {
+                               vf->ch[i].max_tx_rate =
+                                       tci->list[i].max_tx_rate;
+                       }
+               }
                vf->ch[i].num_qps = tci->list[i].count;
+       }
 
        /* set this flag only after making sure all inputs are sane */
        vf->adq_enabled = true;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h 
b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
index 67543dbefcd8..6e794c8a1ef3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
@@ -79,6 +79,7 @@ struct i40evf_channel {
        u16 vsi_idx; /* index in PF struct for all channel VSIs */
        u16 vsi_id; /* VSI ID used by firmware */
        u16 num_qps; /* number of queue pairs requested by user */
+       u64 max_tx_rate; /* bandwidth rate allocation for VSIs */
 };
 
 /* VF information structure */
-- 
2.14.3

Reply via email to