Update teranetics_aneg_done() to use genphy_c45_aneg_done() instead of
duplicating that code, and switch to gen10g_* functions where
appropriate instead of maintaining identical copies doing nothing.

Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
 drivers/net/phy/teranetics.c | 32 +++++---------------------------
 1 file changed, 5 insertions(+), 27 deletions(-)

diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c
index fb2cef764e9a..22f3bdd8206c 100644
--- a/drivers/net/phy/teranetics.c
+++ b/drivers/net/phy/teranetics.c
@@ -34,39 +34,17 @@ MODULE_LICENSE("GPL v2");
                                MDIO_PHYXS_LNSTAT_SYNC3 | \
                                MDIO_PHYXS_LNSTAT_ALIGN)
 
-static int teranetics_config_init(struct phy_device *phydev)
-{
-       phydev->supported = SUPPORTED_10000baseT_Full;
-       phydev->advertising = SUPPORTED_10000baseT_Full;
-
-       return 0;
-}
-
-static int teranetics_soft_reset(struct phy_device *phydev)
-{
-       return 0;
-}
-
 static int teranetics_aneg_done(struct phy_device *phydev)
 {
-       int reg;
-
        /* auto negotiation state can only be checked when using copper
         * port, if using fiber port, just lie it's done.
         */
-       if (!phy_read_mmd(phydev, MDIO_MMD_VEND1, 93)) {
-               reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
-               return (reg < 0) ? reg : (reg & BMSR_ANEGCOMPLETE);
-       }
+       if (!phy_read_mmd(phydev, MDIO_MMD_VEND1, 93))
+               return genphy_c45_aneg_done(phydev);
 
        return 1;
 }
 
-static int teranetics_config_aneg(struct phy_device *phydev)
-{
-       return 0;
-}
-
 static int teranetics_read_status(struct phy_device *phydev)
 {
        int reg;
@@ -102,10 +80,10 @@ static struct phy_driver teranetics_driver[] = {
        .phy_id         = PHY_ID_TN2020,
        .phy_id_mask    = 0xffffffff,
        .name           = "Teranetics TN2020",
-       .soft_reset     = teranetics_soft_reset,
+       .soft_reset     = gen10g_no_soft_reset,
        .aneg_done      = teranetics_aneg_done,
-       .config_init    = teranetics_config_init,
-       .config_aneg    = teranetics_config_aneg,
+       .config_init    = gen10g_config_init,
+       .config_aneg    = gen10g_config_aneg,
        .read_status    = teranetics_read_status,
        .match_phy_device = teranetics_match_phy_device,
 },
-- 
2.14.1

Reply via email to