The server processor is a Pentium-M 1.7GHz (ondemand governor, from 0.6GHz -> 1.7GHz).
Gigabit path from server -> switch -> client. Client runs WinXP, Core2Duo 2.13GHz, Realtek RTL8168/8111 PCI-e NIC. Flow contol enabled in both directions, both for client and server: sky2 lan0: Link is up at 1000 Mbps, full duplex, flow control both Jumbo frames are in use on the tx side of server only - MTU 9000. I reproduced this with sky2 v1.7 with non-jumbo MTU 1500 frames too. Let me know if there is any further information I can grab and/or any other settings/tweaks/patches I can try. Dan On 26/09/06, Stephen Hemminger <[EMAIL PROTECTED]> wrote:
On Tue, 26 Sep 2006 18:58:40 +0100 "Daniel J Blueman" <[EMAIL PROTECTED]> wrote: > I got a this message with sky2 on 2.6.18 + the sky2 v1.7 patches - it > has different status bits set than before (0x977d977d): > > kernel: sky2 lan0: rx error, status 0x377d377d length 0 > > Great work so far though - this race takes a while to hit! > > Dan What speed processor? Are you using receive flow control? Are you using Jumbo frames? -- Stephen Hemminger <[EMAIL PROTECTED]>
-- Daniel J Blueman - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
