[PATCH net-next v2 11/15] ARM: dts: sun8i: r40: bananapi-m2-ultra: Sort device node dereferences

[Chen-Yu Tsai]

The device nodes dereference (&foo) usages should be sorted by the label
names, barring any parsing order issues such as the #include statement
for the PMIC's .dtsi file that must come after the PMIC.

Move the mmc and ohci blocks in front of the PMIC's regulator blocks.

Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
 .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts  | 69 ++++++++++---------
 1 file changed, 35 insertions(+), 34 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts 
b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 27d9ccd0ef2f..c6da21e43572 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -114,6 +114,41 @@
 
 #include "axp22x.dtsi"
 
+&mmc0 {
+       vmmc-supply = <&reg_dcdc1>;
+       bus-width = <4>;
+       cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+       cd-inverted;
+       status = "okay";
+};
+
+&mmc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pg_pins>;
+       vmmc-supply = <&reg_dldo2>;
+       vqmmc-supply = <&reg_dldo1>;
+       mmc-pwrseq = <&wifi_pwrseq>;
+       bus-width = <4>;
+       non-removable;
+       status = "okay";
+};
+
+&mmc2 {
+       vmmc-supply = <&reg_dcdc1>;
+       vqmmc-supply = <&reg_dcdc1>;
+       bus-width = <8>;
+       non-removable;
+       status = "okay";
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&ohci2 {
+       status = "okay";
+};
+
 &reg_aldo3 {
        regulator-always-on;
        regulator-min-microvolt = <2700000>;
@@ -161,40 +196,6 @@
        regulator-name = "vcc-wifi";
 };
 
-&mmc0 {
-       vmmc-supply = <&reg_dcdc1>;
-       bus-width = <4>;
-       cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
-       status = "okay";
-};
-
-&mmc1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc1_pg_pins>;
-       vmmc-supply = <&reg_dldo2>;
-       vqmmc-supply = <&reg_dldo1>;
-       mmc-pwrseq = <&wifi_pwrseq>;
-       bus-width = <4>;
-       non-removable;
-       status = "okay";
-};
-
-&mmc2 {
-       vmmc-supply = <&reg_dcdc1>;
-       vqmmc-supply = <&reg_dcdc1>;
-       bus-width = <8>;
-       non-removable;
-       status = "okay";
-};
-
-&ohci1 {
-       status = "okay";
-};
-
-&ohci2 {
-       status = "okay";
-};
-
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pb_pins>;
-- 
2.17.0