On Fri, Apr 27, 2018 at 8:22 PM, ojab // <o...@ojab.ru> wrote: > Oh hai! > > I've created bugzilla ticket about this, but I'm not sure if anyone > reads it, so duplicating here. > > I have new motherboard (ASUS A320-K) with 10ec:8168 realtek network > card installed and it doesn't work (i. e. `tcpdump` shows outgoing > packets but no packets are actually transmitted and `tcpdump` doesn't > show incoming packets while they are trasmitted from the other side) > then after 200-300 seconds I see [full stacktrace [1] and lspci [2] > output are attached to bugzilla ticket] > > [ 256.996145] ------------[ cut here ]------------ > [ 256.997574] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out > [ 256.998992] WARNING: CPU: 6 PID: 0 at dev_watchdog+0x1f2/0x200 > … > > [ 257.012243] RIP: 0010:dev_watchdog+0x1f2/0x200 > … > [ 257.032044] <IRQ> > [ 257.033829] ? pfifo_fast_init+0x150/0x150 > [ 257.035618] call_timer_fn+0x2b/0x120 > [ 257.037400] run_timer_softirq+0x2f4/0x410 > [ 257.039170] ? pfifo_fast_init+0x150/0x150 > [ 257.040931] ? timerqueue_add+0x52/0x80 > [ 257.042694] ? __hrtimer_run_queues+0x161/0x2e0 > [ 257.044462] __do_softirq+0x111/0x32c > [ 257.046223] irq_exit+0x85/0x90 > [ 257.047966] smp_apic_timer_interrupt+0x6c/0x120 > [ 257.049720] apic_timer_interrupt+0xf/0x20 > [ 257.051475] </IRQ> > > and everything starts working normally. How can I make it work right after > boot? > > The issue is reproducible in linux-4.16.5 & linux-4.17-rc2 with > rtl_nic fw from linux-firmware git master. > > [1] https://bugzilla.kernel.org/attachment.cgi?id=275627 > [2] https://bugzilla.kernel.org/attachment.cgi?id=275629 >
ping? //wbr ojab
