On Wed, May 16, 2018 at 10:58:26PM +0300, Sergei Shtylyov wrote:
> The R-Car V3H (AKA R8A77980) GEther controller adds the DMA burst mode bit
> (NBST) in EDMR and the manual tells to always set it before doing any DMA.
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.bari...@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
Reviewed-by: Simon Horman <horms+rene...@verge.net.au>
>
> ---
> drivers/net/ethernet/renesas/sh_eth.c | 4 ++++
> drivers/net/ethernet/renesas/sh_eth.h | 2 ++
> 2 files changed, 6 insertions(+)
>
> Index: net-next/drivers/net/ethernet/renesas/sh_eth.c
> ===================================================================
> --- net-next.orig/drivers/net/ethernet/renesas/sh_eth.c
> +++ net-next/drivers/net/ethernet/renesas/sh_eth.c
> @@ -1434,6 +1434,10 @@ static int sh_eth_dev_init(struct net_de
>
> sh_eth_write(ndev, mdp->cd->trscer_err_mask, TRSCER);
>
> + /* DMA transfer burst mode */
> + if (mdp->cd->nbst)
> + sh_eth_modify(ndev, EDMR, EDMR_NBST, EDMR_NBST);
> +
> if (mdp->cd->bculr)
> sh_eth_write(ndev, 0x800, BCULR); /* Burst sycle set */
Not related to this patch, but: s/sycle/cycle/
>
> Index: net-next/drivers/net/ethernet/renesas/sh_eth.h
> ===================================================================
> --- net-next.orig/drivers/net/ethernet/renesas/sh_eth.h
> +++ net-next/drivers/net/ethernet/renesas/sh_eth.h
> @@ -184,6 +184,7 @@ enum GECMR_BIT {
>
> /* EDMR */
> enum DMAC_M_BIT {
> + EDMR_NBST = 0x80,
It would be nice to start using BIT() in this file.
> EDMR_EL = 0x40, /* Litte endian */
> EDMR_DL1 = 0x20, EDMR_DL0 = 0x10,
> EDMR_SRST_GETHER = 0x03,
> @@ -505,6 +506,7 @@ struct sh_eth_cpu_data {
> unsigned bculr:1; /* EtherC have BCULR */
> unsigned tsu:1; /* EtherC have TSU */
> unsigned hw_swap:1; /* E-DMAC have DE bit in EDMR */
> + unsigned nbst:1; /* E-DMAC has NBST bit in EDMR */
> unsigned rpadir:1; /* E-DMAC have RPADIR */
> unsigned no_trimd:1; /* E-DMAC DO NOT have TRIMD */
> unsigned no_ade:1; /* E-DMAC DO NOT have ADE bit in EESR */
>
