Hi Antoine, On jeu., mai 17 2018, Antoine Tenart <antoine.ten...@bootlin.com> wrote:
> Hi Dave, Russell, > > This series convert the Marvell PPv2 driver to phylink (models the MAC > to PHY link). > > One important point is the PPv2 driver supports two probe modes: device > tree and ACPI. This series only brings phylink support for the device > tree mode, as the ACPI one will need further work. Still, the driver > should be working as before when using ACPI. This split should be > temporary, and was discussed with Marcin (in Cc.) who added ACPI support > to the driver. > > Also as the SFP cages on both DB boards can be considered as non-wired. > We thus chose not to describe those SFP cages and we use fixed-link. > > The rest of the series uses phylink to add support for 1000BaseX and > 2500BaseX modes in the PPv2 driver. To do this, two patches are needed > in the common PHY framework (patches 3 and 4). The last 4 patches modify > the device tree to use the new PPv2 functionalities. > > The series has been tested for the device tree mode on the 7040-db, > 8040-db and 8040-mcbin boards, to ensure all the interface where working > as expected. > > @Dave: patches 7 to 10 should go through the mvebu tree (Gregory in > Cc.) to avoid any conflict with the other mvebu dt patches taken during > this cycle. Patches 7 to 10 have been applied on mvebu/dt64. Thanks, Gregory > > The series is based on today's net-next. > > Thanks! > Antoine > > Since v2: > - Removed the SFP description from the DB boards, as their SFP cages > are wired properly. We now use fixed-link. > - Because of this rework, split the series in two, so that the SFP > part is reviewed separately. > - Small fixes in the phylink patch. > - Rebased on the latest net-next branch. > > Since v1: > - Chose a different approach to the SFP changes, as the previous ones > weren't valid and reworked both BD boards device trees. > - Misc fixes. > - Added Kishon's acked-by on one patch. > - Rebaed on latest net-next branch. > > Antoine Tenart (9): > net: mvpp2: align the ethtool ops definition > net: mvpp2: phylink support > phy: add 2.5G SGMII mode to the phy_mode enum > phy: cp110-comphy: 2.5G SGMII mode > net: mvpp2: 1000baseX support > net: mvpp2: 2500baseX support > arm64: dts: marvell: mcbin: enable the fourth network interface > arm64: dts: marvell: 8040-db: describe the 10G interfaces as > fixed-link > arm64: dts: marvell: 7040-db: describe the 10G interface as fixed-link > > Russell King (1): > arm64: dts: marvell: mcbin: add 10G SFP support > > .../arm64/boot/dts/marvell/armada-7040-db.dts | 5 + > .../arm64/boot/dts/marvell/armada-8040-db.dts | 10 + > .../boot/dts/marvell/armada-8040-mcbin.dts | 70 ++ > drivers/net/ethernet/marvell/Kconfig | 1 + > drivers/net/ethernet/marvell/mvpp2.c | 931 +++++++++++------- > drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 17 +- > include/linux/phy/phy.h | 1 + > 7 files changed, 680 insertions(+), 355 deletions(-) > > -- > 2.17.0 > -- Gregory Clement, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com