The comm_owned field can hide logic where double locking is attempted
and prevent multiple threads for the same device from accessing the
mutex properly. Remove the comm_owned field and use the mutex API
exclusively for gaining ownership. The current driver has been audited
and is obtaining communications ownership properly.
Signed-off-by: Tom Lendacky <thomas.lenda...@amd.com>
---
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 123ceb0..05003be 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -327,8 +327,6 @@ struct xgbe_phy_data {
unsigned int mdio_addr;
- unsigned int comm_owned;
-
/* SFP Support */
enum xgbe_sfp_comm sfp_comm;
unsigned int sfp_mux_address;
@@ -382,12 +380,6 @@ struct xgbe_phy_data {
static int xgbe_phy_i2c_xfer(struct xgbe_prv_data *pdata,
struct xgbe_i2c_op *i2c_op)
{
- struct xgbe_phy_data *phy_data = pdata->phy_data;
-
- /* Be sure we own the bus */
- if (WARN_ON(!phy_data->comm_owned))
- return -EIO;
-
return pdata->i2c_if.i2c_xfer(pdata, i2c_op);
}
@@ -549,10 +541,6 @@ static int xgbe_phy_sfp_get_mux(struct xgbe_prv_data
*pdata)
static void xgbe_phy_put_comm_ownership(struct xgbe_prv_data *pdata)
{
- struct xgbe_phy_data *phy_data = pdata->phy_data;
-
- phy_data->comm_owned = 0;
-
mutex_unlock(&xgbe_phy_comm_lock);
}
@@ -562,9 +550,6 @@ static int xgbe_phy_get_comm_ownership(struct xgbe_prv_data
*pdata)
unsigned long timeout;
unsigned int mutex_id;
- if (phy_data->comm_owned)
- return 0;
-
/* The I2C and MDIO/GPIO bus is multiplexed between multiple devices,
* the driver needs to take the software mutex and then the hardware
* mutexes before being able to use the busses.
@@ -593,7 +578,6 @@ static int xgbe_phy_get_comm_ownership(struct xgbe_prv_data
*pdata)
XP_IOWRITE(pdata, XP_I2C_MUTEX, mutex_id);
XP_IOWRITE(pdata, XP_MDIO_MUTEX, mutex_id);
- phy_data->comm_owned = 1;
return 0;
}
