On 22.5.2018 21:40, Rob Herring wrote:
On Tue, May 22, 2018 at 01:16:26PM +0200, Michal Vokáč wrote:
Add support for the four-port variant of the Qualcomm QCA833x switch.
The CPU port default link settings can be reconfigured using
a fixed-link sub-node.
Signed-off-by: Michal Vokáč <michal.vo...@ysoft.com>
---
Changes in v2:
- Add commit message and document fixed-link binding.
.../devicetree/bindings/net/dsa/qca8k.txt | 23 +++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
index 9c67ee4..15b9057 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -2,7 +2,10 @@
Required properties:
-- compatible: should be "qca,qca8337"
+- compatible: should be one of:
+ "qca,qca8334"
+ "qca,qca8337"
+
- #size-cells: must be 0
- #address-cells: must be 1
@@ -14,6 +17,20 @@ port and PHY id, each subnode describing a port needs to have a valid phandle
referencing the internal PHY connected to it. The CPU port of this switch is
always port 0.
+A CPU port node has the following optional property:
s/property/node/
Otherwise,
Reviewed-by: Rob Herring <r...@kernel.org>
Good catch, I will correct this.
Thanks for the review Rob.
Michal
