When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode),
get-tsinfo() callback should return the software timestamp capabilities
instead of returning the error.
Fixes: 4c55215c ("qede: Add driver support for PTP")
Signed-off-by: Sudarsana Reddy Kalluru <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
---
drivers/net/ethernet/qlogic/qede/qede_ptp.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qede/qede_ptp.c
b/drivers/net/ethernet/qlogic/qede/qede_ptp.c
index 02adb513..013ff56 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_ptp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_ptp.c
@@ -337,8 +337,14 @@ int qede_ptp_get_ts_info(struct qede_dev *edev, struct
ethtool_ts_info *info)
{
struct qede_ptp *ptp = edev->ptp;
- if (!ptp)
- return -EIO;
+ if (!ptp) {
+ info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE;
+ info->phc_index = -1;
+
+ return 0;
+ }
info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE |
SOF_TIMESTAMPING_RX_SOFTWARE |
--
1.8.3.1
