On 9/15/2018 12:38 AM, Andrew Lunn wrote:
The macro PHY_GBIT_FEAUTRES needs to change into a bitmap in order to
support link_modes. Remove its use from xgde by replacing it with its
definition.
Probably, the current behavior is wrong. It probably should be
ANDing not assigning.
Signed-off-by: Andrew Lunn <and...@lunn.ch>
---
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index a7e03e3ecc93..d49e76982453 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -878,8 +878,9 @@ static bool xgbe_phy_finisar_phy_quirks(struct
xgbe_prv_data *pdata)
phy_write(phy_data->phydev, 0x04, 0x0d01);
phy_write(phy_data->phydev, 0x00, 0x9140);
- phy_data->phydev->supported = PHY_GBIT_FEATURES;
- phy_data->phydev->advertising = phy_data->phydev->supported;
+ phy_data->phydev->supported = (PHY_10BT_FEATURES |
+ PHY_100BT_FEATURES |
+ PHY_1000BT_FEATURES);
Parens not necessary here.
phy_support_asym_pause(phy_data->phydev);
netif_dbg(pdata, drv, pdata->netdev,
@@ -950,8 +951,9 @@ static bool xgbe_phy_belfuse_phy_quirks(struct
xgbe_prv_data *pdata)
reg = phy_read(phy_data->phydev, 0x00);
phy_write(phy_data->phydev, 0x00, reg & ~0x00800);
- phy_data->phydev->supported = PHY_GBIT_FEATURES;
- phy_data->phydev->advertising = phy_data->phydev->supported;
+ phy_data->phydev->supported = (PHY_10BT_FEATURES |
+ PHY_100BT_FEATURES |
+ PHY_1000BT_FEATURES);
Here as well.
[...]
MBR, Sergei
