Not all new style LINK_MODE bits can be converted into old style
SUPPORTED bits. We need to warn when such a conversion is attempted.
Add a helper for this.
Convert all pr_warn() calls to phydev_warn() where possible.
Signed-off-by: Andrew Lunn <and...@lunn.ch>
Reviewed-by: Maxime Chevallier <maxime.chevall...@bootlin.com>
---
v2:
Make use of the new call.
---
drivers/net/phy/at803x.c | 2 +-
drivers/net/phy/dp83640.c | 7 ++++---
drivers/net/phy/marvell.c | 2 +-
drivers/net/phy/marvell10g.c | 6 +++---
drivers/net/phy/microchip.c | 33 +++++++++++++++++----------------
include/linux/phy.h | 3 +++
6 files changed, 29 insertions(+), 24 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 411cf1072bae..e74a047a846e 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -357,7 +357,7 @@ static int at803x_aneg_done(struct phy_device *phydev)
/* check if the SGMII link is OK. */
if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
- pr_warn("803x_aneg_done: SGMII link is not ok\n");
+ phydev_warn(phydev, "803x_aneg_done: SGMII link is not ok\n");
aneg_done = 0;
}
/* switch back to copper page */
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 29aa8d772b0c..74cf356d8171 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -553,16 +553,17 @@ static void enable_status_frames(struct phy_device
*phydev, bool on)
mutex_unlock(&clock->extreg_lock);
if (!phydev->attached_dev) {
- pr_warn("expected to find an attached netdevice\n");
+ phydev_warn(phydev,
+ "expected to find an attached netdevice\n");
return;
}
if (on) {
if (dev_mc_add(phydev->attached_dev, status_frame_dst))
- pr_warn("failed to add mc address\n");
+ phydev_warn(phydev, "failed to add mc address\n");
} else {
if (dev_mc_del(phydev->attached_dev, status_frame_dst))
- pr_warn("failed to delete mc address\n");
+ phydev_warn(phydev, "failed to delete mc address\n");
}
}
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 24fc4a73c300..8872a430d74a 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -638,7 +638,7 @@ static void marvell_config_led(struct phy_device *phydev)
err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, MII_PHY_LED_CTRL,
def_config);
if (err < 0)
- pr_warn("Fail to config marvell phy LED.\n");
+ phydev_warn(phydev, "Fail to config marvell phy LED.\n");
}
static int marvell_config_init(struct phy_device *phydev)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index f77a2d9e7f9d..f214834819dd 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -337,9 +337,9 @@ static int mv3310_config_init(struct phy_device *phydev)
}
if (!ethtool_convert_link_mode_to_legacy_u32(&mask, supported))
- dev_warn(&phydev->mdio.dev,
- "PHY supports (%*pb) more modes than phylib supports,
some modes not supported.\n",
- __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
+ phydev_warn(phydev,
+ "PHY supports (%*pb) more modes than phylib
supports, some modes not supported.\n",
+ __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
phydev->supported &= mask;
phydev->advertising &= phydev->supported;
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index 2d67937866a3..04b12e34da58 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -88,7 +88,7 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16
regaddr,
/* Save current page */
save_page = phy_save_page(phydev);
if (save_page < 0) {
- pr_warn("Failed to get current page\n");
+ phydev_warn(phydev, "Failed to get current page\n");
goto err;
}
@@ -98,14 +98,14 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev,
u16 regaddr,
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA,
(data & 0xFFFF));
if (ret < 0) {
- pr_warn("Failed to write TR low data\n");
+ phydev_warn(phydev, "Failed to write TR low data\n");
goto err;
}
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA,
(data & 0x00FF0000) >> 16);
if (ret < 0) {
- pr_warn("Failed to write TR high data\n");
+ phydev_warn(phydev, "Failed to write TR high data\n");
goto err;
}
@@ -115,14 +115,15 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev,
u16 regaddr,
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf);
if (ret < 0) {
- pr_warn("Failed to write data in reg\n");
+ phydev_warn(phydev, "Failed to write data in reg\n");
goto err;
}
usleep_range(1000, 2000);/* Wait for Data to be written */
val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR);
if (!(val & 0x8000))
- pr_warn("TR Register[0x%X] configuration failed\n", regaddr);
+ phydev_warn(phydev, "TR Register[0x%X] configuration failed\n",
+ regaddr);
err:
return phy_restore_page(phydev, save_page, ret);
}
@@ -137,7 +138,7 @@ static void lan88xx_config_TR_regs(struct phy_device
*phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A);
if (err < 0)
- pr_warn("Failed to Set Register[0x0F82]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x0F82]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x06.
* Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv,
@@ -145,7 +146,7 @@ static void lan88xx_config_TR_regs(struct phy_device
*phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F);
if (err < 0)
- pr_warn("Failed to Set Register[0x168C]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x168C]\n");
/* Get access to Channel b'10, Node b'1111, Register 0x11.
* Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh
@@ -153,7 +154,7 @@ static void lan88xx_config_TR_regs(struct phy_device
*phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620);
if (err < 0)
- pr_warn("Failed to Set Register[0x17A2]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x17A2]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x10.
* Write 24-bit value 0xEEFFDD to register. Setting
@@ -162,7 +163,7 @@ static void lan88xx_config_TR_regs(struct phy_device
*phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD);
if (err < 0)
- pr_warn("Failed to Set Register[0x16A0]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x16A0]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x13.
* Write 24-bit value 0x071448 to register. Setting
@@ -170,7 +171,7 @@ static void lan88xx_config_TR_regs(struct phy_device
*phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448);
if (err < 0)
- pr_warn("Failed to Set Register[0x16A6]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x16A6]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x12.
* Write 24-bit value 0x13132F to register. Setting
@@ -178,7 +179,7 @@ static void lan88xx_config_TR_regs(struct phy_device
*phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F);
if (err < 0)
- pr_warn("Failed to Set Register[0x16A4]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x16A4]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x14.
* Write 24-bit value 0x0 to register. Setting eee_3level_delay,
@@ -186,7 +187,7 @@ static void lan88xx_config_TR_regs(struct phy_device
*phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0);
if (err < 0)
- pr_warn("Failed to Set Register[0x16A8]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x16A8]\n");
/* Get access to Channel b'01, Node b'1111, Register 0x34.
* Write 24-bit value 0x91B06C to register. Setting
@@ -195,7 +196,7 @@ static void lan88xx_config_TR_regs(struct phy_device
*phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C);
if (err < 0)
- pr_warn("Failed to Set Register[0x0FE8]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x0FE8]\n");
/* Get access to Channel b'01, Node b'1111, Register 0x3E.
* Write 24-bit value 0xC0A028 to register. Setting
@@ -204,7 +205,7 @@ static void lan88xx_config_TR_regs(struct phy_device
*phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028);
if (err < 0)
- pr_warn("Failed to Set Register[0x0FFC]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x0FFC]\n");
/* Get access to Channel b'01, Node b'1111, Register 0x35.
* Write 24-bit value 0x041600 to register. Setting
@@ -213,14 +214,14 @@ static void lan88xx_config_TR_regs(struct phy_device
*phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600);
if (err < 0)
- pr_warn("Failed to Set Register[0x0FEA]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x0FEA]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x03.
* Write 24-bit value 0x000004 to register. Setting TrFreeze bits.
*/
err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004);
if (err < 0)
- pr_warn("Failed to Set Register[0x1686]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x1686]\n");
}
static int lan88xx_probe(struct phy_device *phydev)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index d24cc46748e2..0ab9f89773fd 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -968,6 +968,9 @@ static inline void phy_device_reset(struct phy_device
*phydev, int value)
#define phydev_err(_phydev, format, args...) \
dev_err(&_phydev->mdio.dev, format, ##args)
+#define phydev_warn(_phydev, format, args...) \
+ dev_warn(&_phydev->mdio.dev, format, ##args)
+
#define phydev_dbg(_phydev, format, args...) \
dev_dbg(&_phydev->mdio.dev, format, ##args)
--
2.19.0.rc1
