Tomas, more than three years back you reported network problems after BQL was added to the r8169 driver. Due to this the change was reverted. Now the discussion to add BQL popped up again. You mentioned that the issue exists on one of your systems only. Therefore it could be an issue specific to a particular chip version.
I'd be interested in the chip version of the affected system. You linked to another similar report, there the chip version was: r8169 0000:10:00.0 eth0: RTL8168c/8111c at 0xf8130000, 00:e0:4c:68:48:d2, XID 1c4000c0 IRQ 29 In case you still have the affected system or at least the old dmesg logs, I'd appreciate if you could let me know the quoted line from dmesg output. Thanks a lot, Heiner -------- Forwarded Message -------- Subject: Re: [PATCH net] r8169: fix NAPI handling under high load Date: Wed, 17 Oct 2018 20:12:48 +0200 From: Heiner Kallweit <hkallwe...@gmail.com> To: Holger Hoffstätte <hol...@applied-asynchrony.com>, David Miller <da...@davemloft.net>, Realtek linux nic maintainers <nic_s...@realtek.com> CC: netdev@vger.kernel.org <netdev@vger.kernel.org> On 16.10.2018 23:17, Holger Hoffstätte wrote: > On 10/16/18 22:37, Heiner Kallweit wrote: >> rtl_rx() and rtl_tx() are called only if the respective bits are set >> in the interrupt status register. Under high load NAPI may not be >> able to process all data (work_done == budget) and it will schedule >> subsequent calls to the poll callback. >> rtl_ack_events() however resets the bits in the interrupt status >> register, therefore subsequent calls to rtl8169_poll() won't call >> rtl_rx() and rtl_tx() - chip interrupts are still disabled. > > Very interesting! Could this be the reason for the mysterious > hangs & resets we experienced when enabling BQL for r8169? > They happened more often with TSO/GSO enabled and several people > attempted to fix those hangs unsuccessfully; it was later reverted > and has been since then (#87cda7cb43). > If this bug has been there "forever" it might be tempting to > re-apply BQL and see what happens. Any chance you could give that > a try? I'll gladly test patches, just like I'll run this one. > After reading through the old mail threads regarding BQL on r8169 I don't think the fix here is related. It seems that BQL on r8169 worked fine for most people, just one had problems on one of his systems. I assume the issue was specific to one chip version. From the ~ 50 chip versions supported by r8169 more or less each one requires its own quirks. If we're lucky the chip-version-specific issue has been fixed in the meantime and we can simply apply the old BQL patch again. If it turns out that certain chip versions can't be used with BQL, then we can disable the feature for these chip versions instead of removing the feature completely. I will apply the old BQL patch and see how it's on my system (with GRO and SG enabled). > cheers > Holger > Heiner
