The current driver supports handling two vector0 interrupts, reset and
mailbox. When the hardware reports an interrupt of another type of
interrupt source, if the driver does not process the interrupt and
enables the interrupt, the hardware will repeatedly report the unknown
interrupt.
Therefore, the driver enables the vector0 interrupt after clearing the
known type of interrupt source. Other conditions are not enabled.
Fixes: cd8c5c269b1d ("net: hns3: Fix for hclge_reset running repeatly problem")
Signed-off-by: Huazhong Tan <tanhuazh...@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 5234b53..2a63147 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2236,7 +2236,7 @@ static irqreturn_t hclge_misc_irq_handle(int irq, void
*data)
}
/* clear the source of interrupt if it is not cause by reset */
- if (event_cause != HCLGE_VECTOR0_EVENT_RST) {
+ if (event_cause == HCLGE_VECTOR0_EVENT_MBX) {
hclge_clear_event_cause(hdev, event_cause, clearval);
hclge_enable_vector(&hdev->misc_vector, true);
}
--
2.7.4
