I've got the right URL this time... :-)
---
The following changes since commit 16b7b2ac0148e839da86af8747b6fa4aad43a9b7:
Atsushi Nemoto:
[MIPS] Fixup migration to GENERIC_TIME
are found in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
upstream-fixes
Jiri Benc:
ieee80211: don't flood log with errors
Larry Finger:
bcm43xx: fix unexpected LED control values in BCM4303 sprom
Michael Buesch:
bcm43xx: Fix low-traffic netdev watchdog TX timeouts
Pavel Roskin:
hostap_plx: fix CIS verification
drivers/net/wireless/bcm43xx/bcm43xx_leds.c | 7 ++++++-
drivers/net/wireless/bcm43xx/bcm43xx_leds.h | 6 ++++++
drivers/net/wireless/bcm43xx/bcm43xx_main.c | 16 +++++++++++++++-
drivers/net/wireless/hostap/hostap_plx.c | 4 ++--
net/ieee80211/ieee80211_rx.c | 12 ++++++------
5 files changed, 35 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
index 2ddbec6..7d383a2 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
@@ -189,20 +189,24 @@ void bcm43xx_leds_update(struct bcm43xx_
case BCM43xx_LED_INACTIVE:
continue;
case BCM43xx_LED_OFF:
+ case BCM43xx_LED_BCM4303_3:
break;
case BCM43xx_LED_ON:
turn_on = 1;
break;
case BCM43xx_LED_ACTIVITY:
+ case BCM43xx_LED_BCM4303_0:
turn_on = activity;
break;
case BCM43xx_LED_RADIO_ALL:
turn_on = radio->enabled;
break;
case BCM43xx_LED_RADIO_A:
+ case BCM43xx_LED_BCM4303_2:
turn_on = (radio->enabled && phy->type ==
BCM43xx_PHYTYPE_A);
break;
case BCM43xx_LED_RADIO_B:
+ case BCM43xx_LED_BCM4303_1:
turn_on = (radio->enabled &&
(phy->type == BCM43xx_PHYTYPE_B ||
phy->type == BCM43xx_PHYTYPE_G));
@@ -257,7 +261,8 @@ #ifdef CONFIG_BCM43XX_DEBUG
continue;
#endif /* CONFIG_BCM43XX_DEBUG */
default:
- assert(0);
+ dprintkl(KERN_INFO PFX "Bad value in leds_update,"
+ " led->behaviour: 0x%x\n", led->behaviour);
};
if (led->activelow)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
index d3716cf..811e14a 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
@@ -46,6 +46,12 @@ enum { /* LED behaviour values */
BCM43xx_LED_TEST_BLINKSLOW,
BCM43xx_LED_TEST_BLINKMEDIUM,
BCM43xx_LED_TEST_BLINKFAST,
+
+ /* Misc values for BCM4303 */
+ BCM43xx_LED_BCM4303_0 = 0x2B,
+ BCM43xx_LED_BCM4303_1 = 0x78,
+ BCM43xx_LED_BCM4303_2 = 0x2E,
+ BCM43xx_LED_BCM4303_3 = 0x19,
};
int bcm43xx_leds_init(struct bcm43xx_private *bcm);
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index a94c6d8..65edb56 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -3163,9 +3163,11 @@ #define BADNESS_LIMIT 4
static void bcm43xx_periodic_work_handler(void *d)
{
struct bcm43xx_private *bcm = d;
+ struct net_device *net_dev = bcm->net_dev;
unsigned long flags;
u32 savedirqs = 0;
int badness;
+ unsigned long orig_trans_start = 0;
mutex_lock(&bcm->mutex);
badness = estimate_periodic_work_badness(bcm->periodic_state);
@@ -3173,7 +3175,18 @@ static void bcm43xx_periodic_work_handle
/* Periodic work will take a long time, so we want it to
* be preemtible.
*/
- netif_tx_disable(bcm->net_dev);
+
+ netif_tx_lock_bh(net_dev);
+ /* We must fake a started transmission here, as we are going to
+ * disable TX. If we wouldn't fake a TX, it would be possible to
+ * trigger the netdev watchdog, if the last real TX is already
+ * some time on the past (slightly less than 5secs)
+ */
+ orig_trans_start = net_dev->trans_start;
+ net_dev->trans_start = jiffies;
+ netif_stop_queue(net_dev);
+ netif_tx_unlock_bh(net_dev);
+
spin_lock_irqsave(&bcm->irq_lock, flags);
bcm43xx_mac_suspend(bcm);
if (bcm43xx_using_pio(bcm))
@@ -3198,6 +3211,7 @@ static void bcm43xx_periodic_work_handle
bcm43xx_pio_thaw_txqueues(bcm);
bcm43xx_mac_enable(bcm);
netif_wake_queue(bcm->net_dev);
+ net_dev->trans_start = orig_trans_start;
}
mmiowb();
spin_unlock_irqrestore(&bcm->irq_lock, flags);
diff --git a/drivers/net/wireless/hostap/hostap_plx.c
b/drivers/net/wireless/hostap/hostap_plx.c
index 6dfa041..bc81b13 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -364,7 +364,7 @@ #define CIS_MAX_LEN 256
pos = 0;
while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) {
- if (pos + cis[pos + 1] >= CIS_MAX_LEN)
+ if (pos + 2 + cis[pos + 1] > CIS_MAX_LEN)
goto cis_error;
switch (cis[pos]) {
@@ -391,7 +391,7 @@ #define CIS_MAX_LEN 256
break;
case CISTPL_MANFID:
- if (cis[pos + 1] < 5)
+ if (cis[pos + 1] < 4)
goto cis_error;
manfid1 = cis[pos + 2] + (cis[pos + 3] << 8);
manfid2 = cis[pos + 4] + (cis[pos + 5] << 8);
diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
index 7707041..2759312 100644
--- a/net/ieee80211/ieee80211_rx.c
+++ b/net/ieee80211/ieee80211_rx.c
@@ -1078,12 +1078,12 @@ #endif
while (length >= sizeof(*info_element)) {
if (sizeof(*info_element) + info_element->len > length) {
- IEEE80211_ERROR("Info elem: parse failed: "
- "info_element->len + 2 > left : "
- "info_element->len+2=%zd left=%d,
id=%d.\n",
- info_element->len +
- sizeof(*info_element),
- length, info_element->id);
+ IEEE80211_DEBUG_MGMT("Info elem: parse failed: "
+ "info_element->len + 2 > left : "
+ "info_element->len+2=%zd left=%d,
id=%d.\n",
+ info_element->len +
+ sizeof(*info_element),
+ length, info_element->id);
/* We stop processing but don't return an error here
* because some misbehaviour APs break this rule. ie.
* Orinoco AP1000. */
--
John W. Linville
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
