From: Eugeniu Rosca <rosca.euge...@gmail.com>
Document the support for rcar_can on R8A77965 SoC devices.
Add R8A77965 to the list of SoCs which require the "assigned-clocks" and
"assigned-clock-rates" properties (thanks, Sergei).
Signed-off-by: Eugeniu Rosca <ero...@de.adit-jv.com>
Reviewed-by: Simon Horman <horms+rene...@verge.net.au>
Reviewed-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
Reviewed-by: Rob Herring <r...@kernel.org>
Signed-off-by: Marc Kleine-Budde <m...@pengutronix.de>
---
Documentation/devicetree/bindings/net/can/rcar_can.txt | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt
b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index cc4372842bf3..47fc68148f38 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -14,6 +14,7 @@ Required properties:
"renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
"renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
"renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
+ "renesas,can-r8a77965" if CAN controller is a part of R8A77965
SoC.
"renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible
device.
"renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
compatible device.
@@ -29,11 +30,10 @@ Required properties:
- pinctrl-0: pin control group to be used for this controller.
- pinctrl-names: must be "default".
-Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796"
-compatible:
-In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock
-and can be used by both CAN and CAN FD controller at the same time. It needs to
-be scaled to maximum frequency if any of these controllers use it. This is done
+Required properties for R8A7795, R8A7796 and R8A77965:
+For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
+be used by both CAN and CAN FD controller at the same time. It needs to be
+scaled to maximum frequency if any of these controllers use it. This is done
using the below properties:
- assigned-clocks: phandle of clkp2(CANFD) clock.
--
2.19.1
