From: Mitch Williams <mitch.a.willi...@intel.com>
On link types that do not support autoneg, we cannot attempt to restart
nway negotiation. This results in a dead link that requires a power
cycle to remedy.
Fix this by saving off the autoneg state and checking this value before
we try to restart nway.
Signed-off-by: Mitch Williams <mitch.a.willi...@intel.com>
Tested-by: Andrew Bowers <andrewx.bow...@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com>
---
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 311edac272aa..1ed241a5c3f4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1335,6 +1335,7 @@ static int i40e_set_pauseparam(struct net_device *netdev,
i40e_status status;
u8 aq_failures;
int err = 0;
+ u32 is_an;
/* Changing the port's flow control is not supported if this isn't the
* port's controlling PF
@@ -1347,15 +1348,14 @@ static int i40e_set_pauseparam(struct net_device
*netdev,
if (vsi != pf->vsi[pf->lan_vsi])
return -EOPNOTSUPP;
- if (pause->autoneg != ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
- AUTONEG_ENABLE : AUTONEG_DISABLE)) {
+ is_an = hw_link_info->an_info & I40E_AQ_AN_COMPLETED;
+ if (pause->autoneg != is_an) {
netdev_info(netdev, "To change autoneg please use: ethtool -s
<dev> autoneg <on|off>\n");
return -EOPNOTSUPP;
}
/* If we have link and don't have autoneg */
- if (!test_bit(__I40E_DOWN, pf->state) &&
- !(hw_link_info->an_info & I40E_AQ_AN_COMPLETED)) {
+ if (!test_bit(__I40E_DOWN, pf->state) && !is_an) {
/* Send message that it might not necessarily work*/
netdev_info(netdev, "Autoneg did not complete so changing
settings may not result in an actual change.\n");
}
@@ -1406,7 +1406,7 @@ static int i40e_set_pauseparam(struct net_device *netdev,
err = -EAGAIN;
}
- if (!test_bit(__I40E_DOWN, pf->state)) {
+ if (!test_bit(__I40E_DOWN, pf->state) && is_an) {
/* Give it a little more time to try to come back */
msleep(75);
if (!test_bit(__I40E_DOWN, pf->state))
--
2.19.1
