[BNX2]: Add 5708S parallel detection.
Add code to parallel detect 1Gbps and 2.5Gbps link speeds.
Signed-off-by: Michael Chan <[EMAIL PROTECTED]>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 7897481..ea5daf6 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1067,19 +1067,17 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
bnx2_write_phy(bp, MII_ADVERTISE, new_adv);
bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART |
BMCR_ANENABLE);
- if (CHIP_NUM(bp) == CHIP_NUM_5706) {
- /* Speed up link-up time when the link partner
- * does not autonegotiate which is very common
- * in blade servers. Some blade servers use
- * IPMI for kerboard input and it's important
- * to minimize link disruptions. Autoneg. involves
- * exchanging base pages plus 3 next pages and
- * normally completes in about 120 msec.
- */
- bp->current_interval = SERDES_AN_TIMEOUT;
- bp->serdes_an_pending = 1;
- mod_timer(&bp->timer, jiffies + bp->current_interval);
- }
+ /* Speed up link-up time when the link partner
+ * does not autonegotiate which is very common
+ * in blade servers. Some blade servers use
+ * IPMI for kerboard input and it's important
+ * to minimize link disruptions. Autoneg. involves
+ * exchanging base pages plus 3 next pages and
+ * normally completes in about 120 msec.
+ */
+ bp->current_interval = SERDES_AN_TIMEOUT;
+ bp->serdes_an_pending = 1;
+ mod_timer(&bp->timer, jiffies + bp->current_interval);
}
return 0;
@@ -4228,6 +4226,41 @@ bnx2_5706_serdes_timer(struct bnx2 *bp)
}
static void
+bnx2_5708_serdes_timer(struct bnx2 *bp)
+{
+ if ((bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) == 0) {
+ bp->serdes_an_pending = 0;
+ return;
+ }
+
+ spin_lock(&bp->phy_lock);
+ if (bp->serdes_an_pending)
+ bp->serdes_an_pending--;
+ else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) {
+ u32 bmcr;
+
+ bnx2_read_phy(bp, MII_BMCR, &bmcr);
+
+ if (bmcr & BMCR_ANENABLE) {
+ bmcr &= ~BMCR_ANENABLE;
+ bmcr |= BMCR_FULLDPLX | BCM5708S_BMCR_FORCE_2500;
+ bnx2_write_phy(bp, MII_BMCR, bmcr);
+ bp->current_interval = SERDES_FORCED_TIMEOUT;
+ } else {
+ bmcr &= ~(BMCR_FULLDPLX | BCM5708S_BMCR_FORCE_2500);
+ bmcr |= BMCR_ANENABLE;
+ bnx2_write_phy(bp, MII_BMCR, bmcr);
+ bp->serdes_an_pending = 2;
+ bp->current_interval = bp->timer_interval;
+ }
+
+ } else
+ bp->current_interval = bp->timer_interval;
+
+ spin_unlock(&bp->phy_lock);
+}
+
+static void
bnx2_timer(unsigned long data)
{
struct bnx2 *bp = (struct bnx2 *) data;
@@ -4244,9 +4277,12 @@ bnx2_timer(unsigned long data)
bp->stats_blk->stat_FwRxDrop = REG_RD_IND(bp, BNX2_FW_RX_DROP_COUNT);
- if ((bp->phy_flags & PHY_SERDES_FLAG) &&
- (CHIP_NUM(bp) == CHIP_NUM_5706))
- bnx2_5706_serdes_timer(bp);
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ if (CHIP_NUM(bp) == CHIP_NUM_5706)
+ bnx2_5706_serdes_timer(bp);
+ else if (CHIP_NUM(bp) == CHIP_NUM_5708)
+ bnx2_5708_serdes_timer(bp);
+ }
bnx2_restart_timer:
mod_timer(&bp->timer, jiffies + bp->current_interval);
@@ -4917,11 +4953,10 @@ bnx2_nway_reset(struct net_device *dev)
msleep(20);
spin_lock_bh(&bp->phy_lock);
- if (CHIP_NUM(bp) == CHIP_NUM_5706) {
- bp->current_interval = SERDES_AN_TIMEOUT;
- bp->serdes_an_pending = 1;
- mod_timer(&bp->timer, jiffies + bp->current_interval);
- }
+
+ bp->current_interval = SERDES_AN_TIMEOUT;
+ bp->serdes_an_pending = 1;
+ mod_timer(&bp->timer, jiffies + bp->current_interval);
}
bnx2_read_phy(bp, MII_BMCR, &bmcr);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 78ff09d..7fa7008 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -4040,6 +4040,7 @@ #define PHY_LOOPBACK 2
u8 serdes_an_pending;
#define SERDES_AN_TIMEOUT (HZ / 3)
+#define SERDES_FORCED_TIMEOUT (HZ / 10)
u8 mac_addr[8];
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
