[RFC PATCH net] net: phy: fix the issue that netif always links up after resuming

[Kunihiko Hayashi]

Even though the link is down before entering hibernation,
there is an issue that the network interface always links up after resuming
from hibernation.

The phydev->state is PHY_READY before enabling the network interface, so
the link is down. After resuming from hibernation, the phydev->state is
forcibly set to PHY_UP in mdio_bus_phy_restore(), and the link becomes up.

This patch expects to solve the issue by changing phydev->state to PHY_UP
only when the link is up.

Signed-off-by: Kunihiko Hayashi <hayashi.kunih...@socionext.com>
---
 drivers/net/phy/phy_device.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ab33d17..d5bba0f 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -309,8 +309,10 @@ static int mdio_bus_phy_restore(struct device *dev)
                return ret;
 
        /* The PHY needs to renegotiate. */
-       phydev->link = 0;
-       phydev->state = PHY_UP;
+       if (phydev->link) {
+               phydev->link = 0;
+               phydev->state = PHY_UP;
+       }
 
        phy_start_machine(phydev);
 
-- 
2.7.4