On Thu, 20 Dec 2018 14:40:11 +0530, Vasundhara Volam wrote: > This patchset adds support for configuration parameters setting through > devlink_port. Each device registers supported configuration parameters > table. > > The user can retrieve data on these parameters by > "devlink port param show" command and can set new value to a > parameter by "devlink port param set" command. > All configuration modes supported by devlink_dev are supported > by devlink_port also. > > Command examples and output: > > # devlink port param show > pci/0000:3b:00.0/0: > name wake-on-lan type generic > values: > cmode permanent value false > > pci/0000:3b:00.1/1: > name wake-on-lan type generic > values: > cmode permanent value false > > pci/0000:af:00.0/0: > name wake-on-lan type generic > values: > cmode permanent value true > > # devlink port param show pci/0000:3b:00.0/0 name wake-on-lan > pci/0000:3b:00.0/0: > name wake-on-lan type generic > values: > cmode permanent value false > > # devlink port param set pci/0000:3b:00.0/0 name wake-on-lan cmode permanent > value true > > There is difference of opinion on adding WOL parameter to devlink, between > Jakub Kicinski and Michael Chan. > > Quote from Jakud Kicinski: > --------
Patchwork or git may cut off anything under the ------ line.
