On Thu, May 09, 2019 at 04:48:44PM +0200, Andrew Lunn wrote: > On Wed, May 08, 2019 at 11:13:29PM +0200, Michael Grzeschik wrote: > > Cc: [email protected] > > Signed-off-by: Michael Grzeschik <[email protected]> > > --- > > drivers/net/dsa/microchip/Kconfig | 16 + > > drivers/net/dsa/microchip/Makefile | 2 + > > drivers/net/dsa/microchip/ksz8863.c | 1026 +++++++++++++++++++++++ > > drivers/net/dsa/microchip/ksz8863_reg.h | 605 +++++++++++++ > > drivers/net/dsa/microchip/ksz8863_smi.c | 105 +++ > > drivers/net/dsa/microchip/ksz_priv.h | 3 + > > include/net/dsa.h | 2 + > > net/dsa/Kconfig | 7 + > > net/dsa/tag_ksz.c | 45 + > > 9 files changed, 1811 insertions(+) > > create mode 100644 drivers/net/dsa/microchip/ksz8863.c > > create mode 100644 drivers/net/dsa/microchip/ksz8863_reg.h > > create mode 100644 drivers/net/dsa/microchip/ksz8863_smi.c > > > > diff --git a/drivers/net/dsa/microchip/Kconfig > > b/drivers/net/dsa/microchip/Kconfig > > index bea29fde9f3d1..a6fa6ae972951 100644 > > --- a/drivers/net/dsa/microchip/Kconfig > > +++ b/drivers/net/dsa/microchip/Kconfig > > @@ -14,3 +14,19 @@ config NET_DSA_MICROCHIP_KSZ9477_SPI > > depends on NET_DSA_MICROCHIP_KSZ9477 && SPI > > help > > Select to enable support for registering switches configured through > > SPI. > > + > > +menuconfig NET_DSA_MICROCHIP_KSZ8863 > > + tristate "Microchip KSZ8863 series switch support" > > + depends on NET_DSA > > + select NET_DSA_TAG_KSZ8863 > > + select NET_DSA_MICROCHIP_KSZ_COMMON > > + help > > + This driver adds support for Microchip KSZ8863 switch chips. > > + > > +config NET_DSA_MICROCHIP_KSZ8863_SMI > > > + tristate "KSZ series SMI connected switch driver" > > + depends on NET_DSA_MICROCHIP_KSZ8863 > > + default y > > + help > > + Select to enable support for registering switches configured through > > SMI. > > SMI is a synonym for MDIO. So we should make it clear, this is a > proprietary version. "... through Microchip SMI". > > You might also want to either depend on or select mdio-bitbang, since > that is the other driver which supports Microchip SMI.
Right, I will add the comment and include the depend to mdio-bitbang.
> > +static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
> > + unsigned int len)
> > +{
> > + int i = 0;
> > +
> > + for (i = 0; i < len; i++)
> > + data[i] = (u8)mdiobus_read(dev->bus, 0,
> > + (reg + i) | MII_ADDR_SMI0);
>
> mdiobus_read() and mdiobus_write() can return an error, which is why
> is returns an int. Please check for the error and return it.
Thanks for pointing this out. I will fix it!
> > diff --git a/include/net/dsa.h b/include/net/dsa.h
> > index 6aaaadd6a413c..57fbf3e722362 100644
> > --- a/include/net/dsa.h
> > +++ b/include/net/dsa.h
> > @@ -44,6 +44,7 @@ struct phylink_link_state;
> > #define DSA_TAG_PROTO_TRAILER_VALUE 11
> > #define DSA_TAG_PROTO_8021Q_VALUE 12
> > #define DSA_TAG_PROTO_SJA1105_VALUE 13
> > +#define DSA_TAG_PROTO_KSZ8863_VALUE 14
> >
> > enum dsa_tag_protocol {
> > DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE,
> > @@ -60,6 +61,7 @@ enum dsa_tag_protocol {
> > DSA_TAG_PROTO_TRAILER = DSA_TAG_PROTO_TRAILER_VALUE,
> > DSA_TAG_PROTO_8021Q = DSA_TAG_PROTO_8021Q_VALUE,
> > DSA_TAG_PROTO_SJA1105 = DSA_TAG_PROTO_SJA1105_VALUE,
> > + DSA_TAG_PROTO_KSZ8863 = DSA_TAG_PROTO_KSZ8863_VALUE,
> > };
>
> Please put all the tag driver changes into a separate patch.
Right, I will ad that to another patch.
> > +static struct sk_buff *ksz8863_rcv(struct sk_buff *skb, struct net_device
> > *dev,
> > + struct packet_type *pt)
> > +{
> > + /* Tag decoding */
> > + u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN;
> > + unsigned int port = tag[0] & 1;
>
> Does this device only have 2 ports, 0 and 1?
>
Yes this is a very basic "switch" only managing two physical ports.
Refer Page 28 Chapter 3.7 "Tail Tagging Mode"
in the Reference Manual of the switch:
http://ww1.microchip.com/downloads/en/DeviceDoc/00002335B.pdf
> > + unsigned int len = KSZ_EGRESS_TAG_LEN;
> > +
> > + return ksz_common_rcv(skb, dev, port, len);
> > +}
>
> Andrew
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
signature.asc
Description: PGP signature
