The phy id chosen by Amlogic is incorrectly set in the mdio mux and
does not match the phy driver.
It was not detected before because DT forces the use the correct driver
for the internal PHY.
Fixes: 7090425104db ("net: phy: add amlogic g12a mdio mux support")
Reported-by: Qi Duan <[email protected]>
Signed-off-by: Jerome Brunet <[email protected]>
---
drivers/net/phy/mdio-mux-meson-g12a.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/mdio-mux-meson-g12a.c
b/drivers/net/phy/mdio-mux-meson-g12a.c
index 6fa29ea8e2a3..6644762ff2ab 100644
--- a/drivers/net/phy/mdio-mux-meson-g12a.c
+++ b/drivers/net/phy/mdio-mux-meson-g12a.c
@@ -33,7 +33,7 @@
#define ETH_PLL_CTL7 0x60
#define ETH_PHY_CNTL0 0x80
-#define EPHY_G12A_ID 0x33000180
+#define EPHY_G12A_ID 0x33010180
#define ETH_PHY_CNTL1 0x84
#define PHY_CNTL1_ST_MODE GENMASK(2, 0)
#define PHY_CNTL1_ST_PHYADD GENMASK(7, 3)
--
2.20.1
